lkml.org 
[lkml]   [1999]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlinux-2.2-pre4 `make menuconfig' bugs
Hi,

while playing with the linux-2.2-pre4 kernel I found the following
bugs by using `make menuconfig':


1.) Processor type and features -> Processor family -> Help

The `Help' section say to use "Pentium" for AMD K5/K6/K6-3D but
the menu point say `PPro/K6/6x86MX' (Pentium Pro)


2.) Networking options -> Netlink device emulation

This menu entry appears with "< >" which will normally indicate
an option which is also possible to build as a module. But you
can't choose to build this as a module.
Further more, all other option like this you can toggle with the
spacebar. However, this entry you can only switch off by hitting
the spacebar and switch on by hitting the return key.
This looks a little bit broken.


3.) Following menu entries don't have help available (only checked a few):

SCSI support -> SCSI low-level drivers -> IOMEGA ZIP Plus drive SCSI support
SCSI support -> SCSI low-level drivers -> Initio 9100U(W) support
IrDA subsystem support -> IrDA protocol options
IrDA subsystem support -> Infrared-port device drivers -> Serial dongle support



cu
Michael





-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.032 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site