Messages in this thread |  | | Date | Sat, 30 Jan 1999 23:36:13 +0000 | | From | Jeff Rose <> | | Subject | Re: Sound: DMA (output) timed out -IRQ/DRQ config error? |
| |
"Michael H. Warfield" encouragingly wrote:
> This was driving me nuts (ok, ok - short putt) until I saw some > remark about using sndconfig. I had tried different combinations of > esstype=????, irq=??, and dma=?? and had not gotten anything to work. > When I ran sndconfig, it modified my /etc/conf.modules file with the > following sb line: > > options sb io=0x220 irq=5 dma=0 dma16=5 mpu_io=0x300
Ya mean: options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=x330 -> NOT?
Sob, <lazy> sob! mpu_io=0x300? arrrggghh! means my pnp ne NIC has to be changed to support another workable I/O! Hmmmm... just curious what brought the change from 2.0.* -> 2.1.* -> 2.2.* for the mpu_io= change??? And also curious if NOT selecting pnp since the NIC is a disabled pnp NIC...never mind, shouldn't matter :-P
Hmmmm, me readum more Manuals & docs! ;-)
> That worked!
I'm gonna try to change the mpu_io= to 0x{not conflict with NIC} > Obviously, I have the sound system compiled as a module... :-)
At least I did _that_ ! :-)
Jeff --
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
|  |