lkml.org 
[lkml]   [1999]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-kernel-digest V1 #3266
On Tue, Jan 26, 1999 at 10:44:42PM -0500, Paul Barton-Davis wrote:
> In message <m105JN9-0007U1C@the-village.bc.nu>you write:
> >> Turtle Beach WaveFront Driver
> >> Copyright (C) by Hannu Solvainen, Paul Barton-Davis 1993-1998.
> >> WaveFront: autodetected IRQ 15 not the value provided (9)
> >> WaveFront: hardware reset failed
> >>
> >> WaveFront: firmware download failed!!!
> >> Trying to free free IRQ9
> >> WaveFront: initialization failed.
> >
> >Ok well that card definiely seems to think it isnt where you believe.
> >
> >> other is controlled by the CS4232 chip present on the board. However,
> >> physical access to the CS4232 connector is difficult, and it is
> >> unlikely (though not impossible) that you will want to use it."
> >>
> >> But as I said before I have a CS4231 chip on my board...
> >
> >Basically the same IC
>
> And more importantly, supports PnP. My best guess at this point is
> that your BIOS might be configuring the card. All the configuration of
> the Tropez is really done by the cs4232 module, except that if it
> finds the device already configured, it doesn't do anything. So, if
> the BIOS sticks its head in the door and sets up the Tropez, the
> cs4232 module won't do anything, and regardless of what you have in
> conf.modules, the card is going to end up configured the way the BIOS
> wants it to be (e.g. IRQ 15, not IRQ 9).
>
> On my new machine, I disabled BIOS PnP support for precisely this
> reason. I don't want to have to use the BIOS for device
> configuration. I run Linux, not the Award WinBIOS, and I want to do my
> configuration from Linux.

1. I disabled BIOS PnP
2. The card works under dos with the old settings
3. Mad16 works with the settings
io=0x530 irq=11 dma=0
4. CS4232 still doesn't work

# modprobe cs4232 synthirq=9 synthio=0x290 io=0x530 irq=11 dma=0 dma2=1
/lib/modules/2.2.0/misc/cs4232.o: init_module: Device or resource busy


I'm sure it ISN'T a PnP card. The BIOS doesn't detect it and pnpdump
says '# No boards found'.

--
[:)]---------------------------
[:)] Horvath Karoly Zoltan / Technical University of Budapest
[:)] rh@the.rulez.org / an active member of AC Studio & Live
[:)]-------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.057 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site