lkml.org 
[lkml]   [1999]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: (solved) Serial Problem in 2.2.0-pres
On Wed, Jan 20, 1999 at 03:37:14AM -0500, Shannon Aldinger wrote:
> Apparently, the recent 2.1.x kernels, and the 2.2.0-pres are less tolerent
> of serial ports using the same irq. After checking my inittab, and
> commenting out the getty that was sitting on ttyS3, all was well with
> ttyS1 again. All the 2.0.x kernels had no problems accessing ttyS1, with
> the getty running on ttyS3.
>
> My serial setup is as follows, ttyS3 has had no cable attached since I
> burnt out the vt320 that was attached to it. I had even forgot the getty
> was there. So if you having serial problems in the 2.2.0-pres, and not in
> 2.0.x check your inittab, especially if you have a similar setup.

People should rather check their kernel settings and re-try with
"support for sharing serial irq" enabled (whatever the exact name of
that option is). Change your config, re-compile and install the kernel,
then re-try.

--
Matthias Andree

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.029 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site