Messages in this thread | | | Date | Thu, 17 Sep 1998 20:22:06 -0500 (CDT) | From | "Andre M. Hedrick" <> | Subject | Re: 2.1.122 is confused with two ide controllers |
| |
The latest patch for IDE is my part.
Try adding to you append line "pci=reverse"
I am courious of the onboard chipset for the IDE controller. What is the bus number.
This is a quick fix to get you straight.
{DEVID_PDC20246,"PDC20246", NULL, {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, 0x01, 16 }, ^^^^
If you want to default to your onboard chipset, change the carrot marked line in ide-pci.c to 0x00
This change was to allow offboard PCI cards to be bootable.
You are the first to report another chipset that has a high bus number than the pci slots. I know of only one other chipset that does this also. However, it is an old UMC 486 chipset board.
I will make another config flag that allow one to select between booting of the onboard and offboard chipset for priority in getting the rights to ide0 and ide1.
I will post a patch by morning for 2.1.123.
The reason behind the change in boot order is to allow people to use UDMA devices on older PIIX3 (non-umda mainboards). The second need is for a clean addition of passive offboard chipsets. I never want them to ever get access to ide0 and/or ide1 for the very reason that you are having a problem with.
If by chance your 2.1.121 hda/hdb drives are UDMA and the onboard chipset is not, you can safely switch the cables to the promise controller.
Regards, Andre Hedrick
On Thu, 17 Sep 1998, Don Fisher wrote:
> I have a ASUS P55T2P4D main board with two ide disks and a cdrom using the > onboard ide controller. I also have a Promise ULTRA33 UDMA ide controller in > one of my pci slots supporting other disks etc. > > Under 2.1.121 the hda1 disk is found correctly. Under 2.1.122 the disks on the > onboard controller are missed. The root disk is hda1. On boot I get the > following message from 2.1.121 > > Partition check: > hda: hda1,hda2 > hdb: hdb1,hdb2 > > with everythng happy, while under 2.1.122 I get > > Partition check: > hde: hde1,hde2 > hdf: hdf1,hdf2 > > and a message that it can't find the root partition. Any help would be > appreciated. > > don > -- > ------------------------------------------------------------------- > | Don Fisher dfisher@as.arizona.edu | > | MMT Observatory VOICE: (520)621-7647 | > | University of Arizona FAX: (520)670-5740 | > | Tucson, AZ 85721 | > ------------------------------------------------------------------- > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.rutgers.edu > Please read the FAQ at http://www.tux.org/lkml/ >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |