lkml.org 
[lkml]   [1998]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectThat darn IDE CDROM problem...
I (finally) managed to hang a shell script that mounts a CD, although I
could switch to another VC and get info from there. I ran the script,
did some stuff with directores, but not involving the CD, ran the script
again and it hung.

dmesg:
hdb: ATAPI 4X CDROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.13
VFS: Disk change detected on device 03:40
hdb: irq timeout: status=0xd0 { Busy }
hdb: ATAPI reset complete
ATAPI device hdb:
Error: Unit attention -- (Sense key=0x06)
Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00)
ATAPI device hdb:
Error: Unit attention -- (Sense key=0x06)
Not ready to ready transition, medium may have changed -- (asc=0x28,
ascq=0x00)
VFS: Disk change detected on device 03:40

The first two lines are from the first mount of the CD -- I use kmod.

Syslog says nothing. Checking top, mount (version 2.71) has a status of
"uninterruptable sleep", which apparently means I can't kill it. This
is probably not reproducable, but I will try anyway.

Justin A. Kolodziej

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/faq.html

\
 
 \ /
  Last update: 2005-03-22 13:44    [W:0.132 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site