Messages in this thread | | | Date | Mon, 31 Aug 1998 11:33:14 -0500 (CDT) | From | Greg Whalin <> | Subject | Re: Problems building linux-nfs-0.4.22 with 2.1.117ac3 |
| |
Well, this patch and release of knfsd did fix the compile problems, however, I am now having some further issues in getting knfsd to work.
After installing all the utils and modules, I run the startup script.
/etc/rc.d/rc3.d > ./S35knfsd start Starting NFS services: rpc.kstatd rpc.kmountd rpc.knfsd /etc/rc.d/rc3.d >
Then, if I immediately do a status, I get back
/etc/rc.d/rc3.d > ./S35knfsd status rpc.kmountd (pid 1100) is running... rpc.knfsd is stopped rpc.knfsd is stopped /etc/rc.d/rc3.d >
If I check the ps output, I see the following (edited)
/etc/rc.d/rc3.d > ps ax 1092 p0 S 0:00 rpc.kstatd 1100 ? S 0:00 rpc.kmountd 1107 p0 SW 0:00 (nfsd) 1108 p0 SW 0:00 (nfsd) 1110 p0 SW 0:00 (lockd) 1111 p0 SW 0:00 (rpciod) 199 ? S 0:00 portmap
And, an lsmod
/etc/rc.d//rc3.d > lsmod Module Size Used by nfsd 144476 2 (autoclean) lockd 27340 1 (autoclean) [nfsd] sunrpc 49760 1 (autoclean) [nfsd lockd] 3c59x 16156 1 devpts 3140 1 (autoclean)
An attempted mount from a remote system is showing:
/home/gwhalin> mount -F nfs nfsserver:/test /mnt nfs mount: nfsserver: NFS service not responding nfs mount: retrying: /mnt
And then it times out after a while.
Another question ... I notice that a module is loaded named sunrpc. I had assumed that this would replace the portmap daemon, but I am guessing I was wrong, as none of the deamons would run without me first starting it (portmap).
Any info that could point me in the correct direction would be most helpful. Also, where is all of the info concerning knfsd at? I have been unable to find any helpful info anywhere.
Thanks,
Greg
-------------------- Greg Whalin gwhalin@numerix.com
On Sat, 29 Aug 1998, Steven N. Hirsch wrote:
> > > On Fri, 28 Aug 1998, Greg Whalin wrote: > > > Having some problems getting the linux-nfs-0.4.22 package to build under > > 2.1.117ac3 with egcs-1.0.3a and glibc. I just wanted to make sure that I > > am doing this correctly and not making some stupid error. I spent quit a > > bit of time searching all over the net about info on this, and found very > > little. Is there a URL with a HOWTO concerning knfsd? At any rate, here > > are some of the errors I get when building. > > HJ Liu was kind enough to fix this. You need to pick up: > > ftp://ftp.yggdrasil.com/private/hjl/knfsd-980820.tar.gz > > (or its latest successor). > > It contains a corrected set of utilities and system daemons, along with a > kernel patch against 2.1.111. > > A small change is required to apply against the latest kernels. For > convenience, I've attached the complete diff. > > Linus: Why haven't you applied this to the source tree? > > Steve > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |