Messages in this thread | | | Date | Tue, 25 Aug 1998 20:22:03 +0200 | From | Peter Gervai <> | Subject | Re: 2.1.117, flaky cdrom, frozen mount |
| |
On Tue, Aug 25, 1998 at 08:21:21AM -0600, Erik Andersen wrote: > On Tue, 25 Aug 1998, Peter Gervai wrote: > > > if anyone interested. idecd driver, and a 8x cd which > > spins up quite slowly (2-6 sec). when I try to mount a > > cd the result is: > > > > root@BRaiN:~# mount /cd > > hdd: timeout waiting for DMA > > hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } > > hdd: DMA disabled > > hdd: ATAPI reset complete > > ATAPI device hdd: > > Error: Unit attention -- (Sense key=0x06) > > Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00) > > > > ...and it waits forever. It's especially nice experience > > when it's get mounted on boot. > > > > Solution: not to mount a cd. :-) > > > > bye, > > grin > > > > ps: if you feel to ask further or anything, cc to my email please. thx. > > > > Hmmm. I have now gotten a couple of reports about this occuring, but I'm > not seeing it here. I havn't yet established a pattern. What type of > cdrom drive do you have? What ide chipset? I assume you have a good cable, > right? Do you know what kernel it does work with (i.e. 2.1.116?). Thanks > for your help,
this line appears in the kernel log after the "Power on..." line: ISO 9660 Extensions: RRIP_1991A seems that it recognized the CD _somehow_ but did not get over the init.
The cable supposed to be good (the machine run on 2.0.3x for months). Last dev kernel I tried was around 2.1.96 or so, it worked. If you need it I could revert to 116 but only if you ask for it because the machine is slow and I am usually not there (hard to arrange).
controller, card, cd, etc:
PIIX: IDE controller on PCI bus 00 dev 38 PIIX: not 100% native mode: will probe irqs later PIIX: neither IDE port enabled (BIOS) PIIX: IDE controller on PCI bus 00 dev 39 PIIX: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:pio, hdd:pio hda: QUANTUM LIGHTNING 730A, ATA DISK drive hdc: IBM-DJAA-31080, ATA DISK drive hdd: PCA123CD, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15
The CD is a "noname" 8x ATAPI piece-o-junk.
bye, grin
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |