Messages in this thread | | | Date | Mon, 24 Aug 1998 23:38:20 -0400 (EDT) | From | Eric Youngdale <> | Subject | Re: AHA1542 and dev kernel 115 |
| |
On Mon, 24 Aug 1998, Riccardo Facchetti wrote:
> On Sun, 23 Aug 1998, Eric Youngdale wrote: > > > Is aha1542 meant to be working in 2.1.115 ? > > Found the problem. > The aha1542cf (at least the one I own) don't work on IRQ 12. It works well > on IRQ 10. I don't know why, but setting the controller to IRQ 10 resolved > the problem (may be an hardware conflict).
This doesn't sound like a driver bug.
Are you aware that there are two sets of jumpers for the 1542 - one that sets the IRQ, and the second which sets the IRQ what the host adapter tells the host that it is going to use? As you might expect, these two settings must agree or the card doesn't work.
It could also be a conflict.
-Eric
> > Anyway the exact messages was: > > Unable to abort command for target 0 > Trying device reset for target 0 > Sent BUS RESET to scsi host 0 > > repeated again and again ... in no particular order (at least not > particular to me). > > Ciao, > Riccardo. > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |