lkml.org 
[lkml]   [1998]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.1.116 doesn't boot with BusLogic BT-946C (small update)
From
Date
"Leonard N. Zubkoff" <lnz@dandelion.com> writes:

> From: Jean Wolter <jw5@os.inf.tu-dresden.de>
> Hello,
> [...]
> 2.1.109 boots, 2.1.110 stops booting on my smp machine.
> [...]
> The debugging output from the BusLogic driver is unlikely to be
> particularly helpful. Most likely the problem is with the
> functioning of the newer I/O APIC code on your system.
>
> Leonard

If this is io-apic related... I will append the boot messages from
2.1.109 and 2.1.117. Maybe someone can see, what is wrong. One strange
thing is that immediatly after 'enabling (??)' irq 19 I get an 'unknown
interrupt' (an interrupt with no interrupt handler attached to).

2.1.109:
init IO_APIC IRQs
IO-APIC pin 0, 5, 11, 17, 19, 20, 21, 22, 23 not connected.

2.1.117:
init IO_APIC IRQs
IO-APIC pin 0, 5, 11, 17, 19Unknown interrupt
, 20, 21, 22, 23 not connected.

The board is a Tyan Titan-Pro V2.2 (Dual PPro). If I can provide any
further information or try any patches feel free to ask me.

Jean

[unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream]

--
I get up each morning, gather my wits.
Pick up the paper, read the obits.
if I'm not there I know I'm not dead.
So I eat a good breakfast and go back to bed. Peete Seeger
\
 
 \ /
  Last update: 2005-03-22 13:44    [W:0.049 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site