lkml.org 
[lkml]   [1998]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Can't boot 2.1.10[56] due to SCSI device detection failure
> Hi,
>
> I'm unable to boot kernels 2.10[56] due to the following failure during
> SCSI device scanning; kernel 2.102+io_apic behaves as expected.
>
> Hardware: TYAN TC II, 2xP200, BusLogic-UW, AHA2940 (plain) as 2nd controller.
>
> AHA's device scan fails miserably (and this has been written to paper):
>
> (scsi1:0:-1:-1) Scanning channel for devices.
> scsi: aborting command due to timeout: pid 20, scsi1, channel 0, id 1, lun0\
> Inquiry 000000ff00
> scsi host 1 abort (pid 20) timed out - resetting
> scsi bus is being reset for host 1 channel 0
> scsi host 1 channel 0 reset (pid 20) timed out - trying harder
>
> The last three lines are repeated forever ... ;-(
>
> Any help is highly appreciated,
try disabling Wide Negotiation for the deviced connected to the "normal"
SCSI BUS (ususlly tapes and CDs).
This worked for me (YMMV).
>
> Michael
Mauro
Best Regards

Mauro Condarelli

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:43    [W:0.027 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site