lkml.org 
[lkml]   [1998]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.1.93 won't boot
    Date
    On Mon, 6 Apr 1998 23:34:51 -0700 (PDT), you wrote:

    >
    >Ok, I must have done something really stupid ... but what?
    >
    >i486 system, same config as I used with .92. Kernel made just fine. Got
    >to where is said OK, booting kernel and it resets the machine.

    Exactly the same situation here. 92 fine, 93 reboots instantly after the
    'booting kernel' message appears.

    The same kernel on my 2xPPro-200 SMP box boots ok, except my PCI NE2000 clone is
    not found.

    /proc/pci is (from 2.1.92 on dying PC)

    >PCI devices found:
    > Bus 0, device 11, function 0:
    > VGA compatible controller: Alliance AT3D (rev 2).
    > Slow devsel.
    > Non-prefetchable 32 bit memory at 0xef000000 [0xef000000].
    > I/O at 0xdfa0 [0xdfa1].
    > Bus 0, device 10, function 0:
    > Ethernet controller: Realtek 8029 (rev 0).
    > Medium devsel. IRQ b.
    > I/O at 0xdf40 [0xdf41].
    > Bus 0, device 9, function 0:
    > SCSI storage controller: Adaptec AIC-7861 (rev 1).
    > Medium devsel. Fast back-to-back capable. IRQ a. Master Capable. Latency=32. Min Gnt=4.Max Lat=4.
    > I/O at 0xdc00 [0xdc01].
    > Non-prefetchable 32 bit memory at 0xeefef000 [0xeefef000].
    > Bus 0, device 7, function 1:
    > IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
    > Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
    > I/O at 0xffa0 [0xffa1].
    > Bus 0, device 7, function 0:
    > ISA bridge: Intel 82371SB PIIX3 ISA (rev 1).
    > Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
    > Bus 0, device 0, function 0:
    > Host bridge: Intel 82441FX Natoma (rev 2).
    > Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.


    Config is

    >#
    ># Automatically generated by make menuconfig: don't edit
    >#
    >
    >#
    ># Code maturity level options
    >#
    ># CONFIG_EXPERIMENTAL is not set
    >
    >#
    ># Processor type and features
    >#
    ># CONFIG_M386 is not set
    ># CONFIG_M486 is not set
    >CONFIG_M586=y
    ># CONFIG_M686 is not set
    ># CONFIG_MATH_EMULATION is not set
    >CONFIG_MAX_MEMSIZE=1024
    >
    >#
    ># Loadable module support
    >#
    >CONFIG_MODULES=y
    >CONFIG_MODVERSIONS=y
    ># CONFIG_KMOD is not set
    >
    >#
    ># General setup
    >#
    >CONFIG_NET=y
    >CONFIG_PCI=y
    >CONFIG_PCI_BIOS=y
    >CONFIG_PCI_DIRECT=y
    >CONFIG_PCI_OLD_PROC=y
    ># CONFIG_MCA is not set
    >CONFIG_SYSVIPC=y
    ># CONFIG_BSD_PROCESS_ACCT is not set
    >CONFIG_SYSCTL=y
    >CONFIG_BINFMT_AOUT=y
    >CONFIG_BINFMT_ELF=y
    >CONFIG_BINFMT_MISC=y
    ># CONFIG_VIDEO_SELECT is not set
    >CONFIG_PARPORT=y
    >CONFIG_PARPORT_PC=y
    ># CONFIG_PARPORT_OTHER is not set
    >
    >#
    ># Plug and Play support
    >#
    ># CONFIG_PNP is not set
    >
    >#
    ># Floppy, IDE, and other block devices
    >#
    >CONFIG_BLK_DEV_FD=y
    >CONFIG_BLK_DEV_IDE=y
    ># CONFIG_BLK_DEV_HD_IDE is not set
    >CONFIG_BLK_DEV_IDEDISK=y
    >CONFIG_BLK_DEV_IDECD=y
    ># CONFIG_BLK_DEV_IDETAPE is not set
    ># CONFIG_BLK_DEV_IDEFLOPPY is not set
    ># CONFIG_BLK_DEV_IDESCSI is not set
    >CONFIG_BLK_DEV_CMD640=y
    ># CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    >CONFIG_BLK_DEV_RZ1000=y
    >CONFIG_BLK_DEV_IDEPCI=y
    >CONFIG_BLK_DEV_IDEDMA=y
    ># CONFIG_IDE_CHIPSETS is not set
    ># CONFIG_BLK_DEV_LOOP is not set
    ># CONFIG_BLK_DEV_MD is not set
    ># CONFIG_BLK_DEV_RAM is not set
    ># CONFIG_BLK_DEV_XD is not set
    >CONFIG_PARIDE_PARPORT=y
    ># CONFIG_PARIDE is not set
    ># CONFIG_BLK_DEV_HD is not set
    >
    >#
    ># Networking options
    >#
    >CONFIG_PACKET=y
    >CONFIG_NETLINK=y
    >CONFIG_RTNETLINK=y
    ># CONFIG_NETLINK_DEV is not set
    >CONFIG_FIREWALL=y
    >CONFIG_NET_ALIAS=y
    >CONFIG_FILTER=y
    >CONFIG_UNIX=y
    >CONFIG_INET=y
    ># CONFIG_IP_MULTICAST is not set
    ># CONFIG_IP_ADVANCED_ROUTER is not set
    ># CONFIG_IP_PNP is not set
    >CONFIG_IP_FIREWALL=y
    ># CONFIG_IP_FIREWALL_NETLINK is not set
    ># CONFIG_IP_FIREWALL_VERBOSE is not set
    >CONFIG_IP_TRANSPARENT_PROXY=y
    >CONFIG_IP_ALWAYS_DEFRAG=y
    ># CONFIG_IP_ACCT is not set
    >CONFIG_IP_MASQUERADE=y
    >CONFIG_IP_MASQUERADE_ICMP=y
    ># CONFIG_IP_ROUTER is not set
    >CONFIG_NET_IPIP=y
    >CONFIG_NET_IPGRE=y
    >CONFIG_IP_ALIAS=y
    ># CONFIG_SYN_COOKIES is not set
    ># CONFIG_INET_RARP is not set
    >CONFIG_IP_NOSR=y
    >CONFIG_SKB_LARGE=y
    ># CONFIG_IPX is not set
    ># CONFIG_ATALK is not set
    >
    >#
    ># SCSI support
    >#
    >CONFIG_SCSI=y
    >CONFIG_BLK_DEV_SD=y
    >CONFIG_CHR_DEV_ST=y
    >CONFIG_BLK_DEV_SR=y
    ># CONFIG_BLK_DEV_SR_VENDOR is not set
    ># CONFIG_CHR_DEV_SG is not set
    >CONFIG_SCSI_MULTI_LUN=y
    >CONFIG_SCSI_CONSTANTS=y
    ># CONFIG_SCSI_LOGGING is not set
    >
    >#
    ># SCSI low-level drivers
    >#
    ># CONFIG_SCSI_7000FASST is not set
    ># CONFIG_SCSI_AHA152X is not set
    >CONFIG_SCSI_AHA1542=y
    ># CONFIG_SCSI_AHA1740 is not set
    >CONFIG_SCSI_AIC7XXX=y
    ># CONFIG_AIC7XXX_TAGGED_QUEUEING is not set
    ># CONFIG_OVERRIDE_CMDS is not set
    ># CONFIG_AIC7XXX_PAGE_ENABLE is not set
    ># CONFIG_AIC7XXX_PROC_STATS is not set
    >CONFIG_AIC7XXX_RESET_DELAY=15
    ># CONFIG_SCSI_ADVANSYS is not set
    ># CONFIG_SCSI_IN2000 is not set
    ># CONFIG_SCSI_AM53C974 is not set
    ># CONFIG_SCSI_BUSLOGIC is not set
    ># CONFIG_SCSI_DTC3280 is not set
    ># CONFIG_SCSI_EATA_DMA is not set
    ># CONFIG_SCSI_EATA_PIO is not set
    ># CONFIG_SCSI_EATA is not set
    ># CONFIG_SCSI_FUTURE_DOMAIN is not set
    ># CONFIG_SCSI_GDTH is not set
    ># CONFIG_SCSI_GENERIC_NCR5380 is not set
    ># CONFIG_SCSI_NCR53C406A is not set
    ># CONFIG_SCSI_NCR53C7xx is not set
    >CONFIG_SCSI_NCR53C8XX=y
    ># CONFIG_SCSI_NCR53C8XX_NVRAM_DETECT is not set
    ># CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE is not set
    ># CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
    >CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
    >CONFIG_SCSI_NCR53C8XX_SYNC=5
    ># CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT is not set
    ># CONFIG_SCSI_PPA is not set
    ># CONFIG_SCSI_PAS16 is not set
    ># CONFIG_SCSI_PCI2000 is not set
    ># CONFIG_SCSI_PCI2220I is not set
    ># CONFIG_SCSI_PSI240I is not set
    ># CONFIG_SCSI_QLOGIC_FAS is not set
    ># CONFIG_SCSI_QLOGIC_ISP is not set
    ># CONFIG_SCSI_SEAGATE is not set
    ># CONFIG_SCSI_DC390T is not set
    ># CONFIG_SCSI_T128 is not set
    ># CONFIG_SCSI_U14_34F is not set
    >CONFIG_SCSI_ULTRASTOR=y
    >
    >#
    ># Network device support
    >#
    >CONFIG_NETDEVICES=y
    ># CONFIG_ARCNET is not set
    >CONFIG_DUMMY=m
    ># CONFIG_EQUALIZER is not set
    >CONFIG_NET_ETHERNET=y
    >CONFIG_NET_VENDOR_3COM=y
    ># CONFIG_EL1 is not set
    ># CONFIG_EL2 is not set
    >CONFIG_EL3=y
    ># CONFIG_VORTEX is not set
    ># CONFIG_LANCE is not set
    >CONFIG_NET_VENDOR_SMC=y
    >CONFIG_WD80x3=y
    ># CONFIG_ULTRA is not set
    ># CONFIG_ULTRA32 is not set
    ># CONFIG_SMC9194 is not set
    ># CONFIG_NET_VENDOR_RACAL is not set
    >CONFIG_NET_ISA=y
    ># CONFIG_E2100 is not set
    ># CONFIG_DEPCA is not set
    ># CONFIG_EWRK3 is not set
    ># CONFIG_EEXPRESS is not set
    ># CONFIG_HPLAN_PLUS is not set
    ># CONFIG_HPLAN is not set
    ># CONFIG_HP100 is not set
    >CONFIG_NE2000=y
    ># CONFIG_SK_G16 is not set
    >CONFIG_NET_EISA=y
    ># CONFIG_PCNET32 is not set
    ># CONFIG_APRICOT is not set
    ># CONFIG_CS89x0 is not set
    ># CONFIG_DE4X5 is not set
    >CONFIG_DEC_ELCP=y
    ># CONFIG_DGRS is not set
    ># CONFIG_EEXPRESS_PRO100 is not set
    ># CONFIG_NET_POCKET is not set
    ># CONFIG_FDDI is not set
    ># CONFIG_DLCI is not set
    ># CONFIG_PLIP is not set
    ># CONFIG_PPP is not set
    ># CONFIG_SLIP is not set
    ># CONFIG_NET_RADIO is not set
    ># CONFIG_TR is not set
    ># CONFIG_WAN_DRIVERS is not set
    ># CONFIG_LAPBETHER is not set
    ># CONFIG_X25_ASY is not set
    >
    >#
    ># Amateur Radio support
    >#
    ># CONFIG_HAMRADIO is not set
    >
    >#
    ># ISDN subsystem
    >#
    ># CONFIG_ISDN is not set
    >
    >#
    ># CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
    >#
    ># CONFIG_CD_NO_IDESCSI is not set
    >
    >#
    ># Filesystems
    >#
    ># CONFIG_QUOTA is not set
    ># CONFIG_MINIX_FS is not set
    >CONFIG_EXT2_FS=y
    >CONFIG_ISO9660_FS=y
    ># CONFIG_JOLIET is not set
    >CONFIG_FAT_FS=y
    >CONFIG_MSDOS_FS=y
    ># CONFIG_UMSDOS_FS is not set
    >CONFIG_VFAT_FS=y
    >CONFIG_PROC_FS=y
    >CONFIG_NFS_FS=y
    >CONFIG_NFSD=y
    >CONFIG_SUNRPC=y
    >CONFIG_LOCKD=y
    ># CONFIG_CODA_FS is not set
    >CONFIG_SMB_FS=y
    ># CONFIG_SMB_WIN95 is not set
    ># CONFIG_HPFS_FS is not set
    >CONFIG_NTFS_FS=y
    ># CONFIG_SYSV_FS is not set
    ># CONFIG_AFFS_FS is not set
    ># CONFIG_HFS_FS is not set
    ># CONFIG_ROMFS_FS is not set
    ># CONFIG_AUTOFS_FS is not set
    ># CONFIG_UFS_FS is not set
    ># CONFIG_MAC_PARTITION is not set
    >CONFIG_NLS=y
    >
    >#
    ># Native Language Support
    >#
    ># CONFIG_NLS_CODEPAGE_437 is not set
    ># CONFIG_NLS_CODEPAGE_737 is not set
    ># CONFIG_NLS_CODEPAGE_775 is not set
    ># CONFIG_NLS_CODEPAGE_850 is not set
    ># CONFIG_NLS_CODEPAGE_852 is not set
    ># CONFIG_NLS_CODEPAGE_855 is not set
    ># CONFIG_NLS_CODEPAGE_857 is not set
    ># CONFIG_NLS_CODEPAGE_860 is not set
    >CONFIG_NLS_CODEPAGE_861=y
    ># CONFIG_NLS_CODEPAGE_862 is not set
    ># CONFIG_NLS_CODEPAGE_863 is not set
    ># CONFIG_NLS_CODEPAGE_864 is not set
    ># CONFIG_NLS_CODEPAGE_865 is not set
    ># CONFIG_NLS_CODEPAGE_866 is not set
    ># CONFIG_NLS_CODEPAGE_869 is not set
    ># CONFIG_NLS_CODEPAGE_874 is not set
    ># CONFIG_NLS_ISO8859_1 is not set
    ># CONFIG_NLS_ISO8859_2 is not set
    ># CONFIG_NLS_ISO8859_3 is not set
    ># CONFIG_NLS_ISO8859_4 is not set
    ># CONFIG_NLS_ISO8859_5 is not set
    ># CONFIG_NLS_ISO8859_6 is not set
    ># CONFIG_NLS_ISO8859_7 is not set
    ># CONFIG_NLS_ISO8859_8 is not set
    ># CONFIG_NLS_ISO8859_9 is not set
    ># CONFIG_NLS_KOI8_R is not set
    >
    >#
    ># Character devices
    >#
    >CONFIG_VT=y
    >CONFIG_VT_CONSOLE=y
    >CONFIG_SERIAL=y
    ># CONFIG_SERIAL_CONSOLE is not set
    ># CONFIG_SERIAL_EXTENDED is not set
    ># CONFIG_SERIAL_NONSTANDARD is not set
    ># CONFIG_PRINTER is not set
    >CONFIG_MOUSE=y
    ># CONFIG_ATIXL_BUSMOUSE is not set
    ># CONFIG_BUSMOUSE is not set
    ># CONFIG_MS_BUSMOUSE is not set
    >CONFIG_PSMOUSE=y
    >CONFIG_82C710_MOUSE=y
    ># CONFIG_PC110_PAD is not set
    ># CONFIG_UMISC is not set
    ># CONFIG_QIC02_TAPE is not set
    >CONFIG_APM=y
    >CONFIG_APM_IGNORE_USER_SUSPEND=y
    >CONFIG_APM_DO_ENABLE=y
    >CONFIG_APM_CPU_IDLE=y
    >CONFIG_APM_DISPLAY_BLANK=y
    ># CONFIG_APM_POWER_OFF is not set
    >CONFIG_APM_IGNORE_MULTIPLE_SUSPEND=y
    >CONFIG_WATCHDOG=y
    ># CONFIG_WATCHDOG_NOWAYOUT is not set
    ># CONFIG_WDT is not set
    >CONFIG_SOFT_WATCHDOG=y
    ># CONFIG_PCWATCHDOG is not set
    ># CONFIG_ACQUIRE_WDT is not set
    ># CONFIG_RTC is not set
    ># CONFIG_VIDEO_DEV is not set
    ># CONFIG_NVRAM is not set
    ># CONFIG_JOYSTICK is not set
    ># CONFIG_MISC_RADIO is not set
    >
    >#
    ># Ftape, the floppy tape device driver
    >#
    ># CONFIG_FTAPE is not set
    >
    >#
    ># Sound
    >#
    ># CONFIG_SOUND is not set
    >
    >#
    ># Kernel hacking
    >#
    >CONFIG_PROFILE=y
    >CONFIG_PROFILE_SHIFT=2
    ># CONFIG_MAGIC_SYSRQ is not set
    >CONFIG_VGA_CONSOLE=


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu

    \
     
     \ /
      Last update: 2005-03-22 13:42    [W:5.877 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site