lkml.org 
[lkml]   [1998]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.1.94/5 parport problems
2.1.94 as module, 2.1.95 compiled in, started with parport=0x378,7
lpq says 'waiting for lp to become ready (offline?)
dmesg of .95 attached.
--
GarstLinux version 2.1.95 (root@grr) (gcc version egcs-2.90.27 980315 (egcs-1.0.2 release)) #1 Fri Apr 10 16:43:57 ADT 1998
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
Calibrating delay loop... 33.28 BogoMIPS
Memory: 19024k/20480k available (620k kernel code, 392k reserved, 420k data, 24k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Swansea University Computer Society NET3.039 for Linux 2.1
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
CPU: Intel 486 DX/2 stepping 05
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
POSIX conformance testing by UNIFIX
Starting kswapd v 1.5
parport0: PC-style at 0x378, irq 7 [SPP,PS2]
Serial driver version 4.24 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16450
ttyS01 at 0x02f8 (irq = 3) is a 16450
lp0: using parport0 (interrupt-driven).
APM BIOS version 1.0 Flags 0xf3 (Driver version 1.4)
Entry f000:762f cseg16 f000 dseg f000
AC on line, battery status high, battery life 100%
hda: TOSHIBA MK1302MAN, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: TOSHIBA MK1302MAN, 1296MB w/128kB Cache, CHS=658/64/63
Partition check:
hda: hda1 hda2 hda3
VFS: Mounted root (ext2 filesystem) readonly.
Starting kmod
Freeing unused kernel memory: 24k freed
Adding Swap: 42332k swap-space (priority -1)
IPv4 over IPv4 tunneling driver
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Linux PCMCIA Card Services 3.0.1
kernel build: 2.1.95 #1 Fri Apr 10 16:43:57 ADT 1998
options: [apm]
Intel PCIC probe:
Cirrus PD672x at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: [ring] [65/6/0] [1/15/0]
host opts [1]: [ring] [freq bypass] [65/6/0] [1/15/0]
ISA irqs (default) = 3,4,5,9,10,11,12 status change on irq 11
cs: IO port probe 0x0100-0x03ff: excluding 0x190-0x197 0x228-0x22f 0x250-0x257 0x290-0x297 0x388-0x397 0x3b8-0x3e7
cs: memory probe 0x0c8000-0x0cffff: clean.
Ql: Using preset base address of 230
Ql: Using preset IRQ 3
scsi0 : Qlogicfas Driver version 0.46, chip 50 at 230, IRQ 3, TPdma:1
scsi : 1 host.
Vendor: SyQuest Model: EZ135S Rev: 1_13
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 3, lun 0
Vendor: MATSHITA Model: KME CD-ROM02 Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
Uniform CD-ROM driver Revision: 2.12
SCSI device sda: hdwr sector= 512 bytes. Sectors= 262144 [128 MB] [0.1 GB]
sda: Write Protect is off
sda: sda1
VFS: Disk change detected on device 0b:00
tty02 at 0x03e8 (irq = 9) is a 16550A
\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.055 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site