Messages in this thread | | | Date | Mon, 16 Mar 1998 00:28:03 -0500 (EST) | From | "J. Maynard Gelinas" <> | Subject | Re: still sound problems.... |
| |
[followup below - various snipping]
> From: Itai Nahshon <nahshon@actcom.co.il> > Subject: Re: still sound problems.... > > J. Maynard Gelinas wrote: > > make: *** [vmlinux] Error 1 > > [root@marquez linux]# > > > > [....oooohhhhh! WIPEOUT!] > > > > That's a whole different problem no ref. to sb_audio_ioctl. You > just have to configure your sound card properly. The Sound part of > the .config file that you sent on Saturday is similar to what I > use (SOUND, SB, ADLIB, MSS, MAD16, YM3812 are modules) but The > output that you sent now cannot be from the same .config file. It > tries to load drivers/sound/sound.a NOT as a module. Please, check > your config file again. >
This is absolutely true, I prefer sound compiled directly into my kernel. However, the post you refer to in your text dates several posts back. There I built sound as a module to verify that someone else's .config would also break. So, if no one else is having problems with the Mad16 driver I _must_ assume that my problem is local. If so, why does it span two distributions on two separate hardware platforms (in my apartment)? I dunno.
May I ask, are all of those sound config options necessary? I just use SOUND, ADLIB, and MAD16, under 2.0.x, and this works just fine. Under 2.1.8[89] I've tried adding YM3812 because 'help' suggests I do so. It doesn't make any difference... both options still fail compilation. However, I will gladly accept a 'tail behind my legs slamdunk _HERE_ is that obvious thing you missed' humiliating email to get sound working on my box. Believe it or not, I want to test Quake II under 2.1 SMP; this is the whole reason for my quest for sound.
--jmg
Sound options used in previous post:
# # Sound # CONFIG_SOUND=y # CONFIG_PAS is not set # CONFIG_SB is not set CONFIG_ADLIB=y # CONFIG_GUS is not set # CONFIG_MPU401 is not set # CONFIG_PSS is not set # CONFIG_MSS is not set # CONFIG_SSCAPE is not set # CONFIG_TRIX is not set CONFIG_MAD16=y CONFIG_MAD16_BASE=F40 CONFIG_MAD16_IRQ=7 CONFIG_MAD16_DMA=3 CONFIG_MAD16_DMA2=0 CONFIG_MAD16_MPU_BASE=0 CONFIG_MAD16_MPU_IRQ=9 # CONFIG_CS4232 is not set # CONFIG_MAUI is not set # CONFIG_OPL3SA1 is not set # CONFIG_SOFTOSS is not set CONFIG_YM3812=y # CONFIG_VMIDI is not set # CONFIG_UART6850 is not set # CONFIG_LOWLEVEL_SOUND is not set
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |