This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Thu Apr 25 09:09:27 2024 Received: from entropy.muc.muohio.edu (entropy.muc.muohio.edu [134.53.193.10]) by herbie.ucs.indiana.edu (8.8.8/8.8.8) with ESMTP id OAA21527 for ; Tue, 24 Feb 1998 14:04:47 -0500 (EST) Received: from vger.rutgers.edu (root@vger.rutgers.edu [128.6.190.2]) by entropy.muc.muohio.edu (8.8.7/8.8.7) with ESMTP id OAA11260; Tue, 24 Feb 1998 14:03:49 -0500 Received: by vger.rutgers.edu id <971282-32245>; Tue, 24 Feb 1998 13:04:31 -0500 Received: from bessie.eunet.fi ([192.26.119.11]:12979 "EHLO bessie.eunet.fi" ident: "NO-IDENT-SERVICE") by vger.rutgers.edu with ESMTP id <971474-32245>; Tue, 24 Feb 1998 11:42:35 -0500 Received: from jlaako.pp.fi (jlaako.pp.fi [193.66.97.49]) by bessie.eunet.fi (8.8.7/8.8.3) with ESMTP id SAA23783 for ; Tue, 24 Feb 1998 18:44:25 +0200 (EET) Message-Id: <34F2F8D6.2C02321B@jlaako.pp.fi> Date: Tue, 24 Feb 1998 18:44:06 +0200 From: Jussi Laako X-Mailer: Mozilla 4.04 [en] (WinNT; I) Mime-Version: 1.0 To: linux-kernel@vger.rutgers.edu Subject: [Fwd: Kernel 2.1.8x doesn't boot] Content-Type: multipart/mixed; boundary="------------94D8AF8013DC32A5384B3D11" X-Orcpt: rfc822;linux-kernel@vger.rutgers.edu Sender: owner-linux-kernel@vger.rutgers.edu Precedence: bulk X-Loop: majordomo@vger.rutgers.edu This is a multi-part message in MIME format. --------------94D8AF8013DC32A5384B3D11 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit --------------94D8AF8013DC32A5384B3D11 Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-ID: <34F2C828.C03D078E@jlaako.pp.fi> Date: Tue, 24 Feb 1998 15:16:24 +0200 From: Jussi Laako X-Mailer: Mozilla 4.04 [en] (WinNT; I) MIME-Version: 1.0 To: MOLNAR Ingo Subject: Re: Kernel 2.1.8x doesn't boot References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit MOLNAR Ingo wrote: > > Jussi, does it boot if you disable paralell port support? Yes! I also found that I was using old style kernel parameter for parallel port (lp=0x378,7). I reread the documentation and sources and changed that to new style (parport=0x378,7 lp=parport0) and now it works fine. Now I feel very stupid... Dunno why it booted with old MB. Only cosmetic problem is that kernel autodetects parallel port to IRQ8 which it "never" can't be. Same autodetection failure with both MBs. - Jussi --------------94D8AF8013DC32A5384B3D11-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu