Messages in this thread | | | From | "Nicholas J. Leon" <> | Date | Mon, 16 Feb 1998 23:49:40 -0500 (EST) | Subject | [R] Panic-like message from shm_swap_in |
| |
Just got an' compiled 2.1.87, got the attached message (and my full boot record). Machine appeared fine for the 10 seconds I left it running .87.
Linux version 2.1.87 (root@neko) (gcc version 2.8.0) #6 Mon Feb 16 22:25:15 EST 1998 INIT IRQ Console: 8 point font, 400 scans Console: colour VGA+ 80x50, 1 virtual console (max 63) PCI: BIOS32 Service Directory structure at 0xc00fb370 PCI: BIOS32 Service Directory entry at 0xfb850 PCI: PCI BIOS revision 2.10 entry at 0xfb880 Probing PCI hardware. Calibrating delay loop... 52.84 BogoMIPS Memory: 47208k/49152k available (760k kernel code, 392k reserved, 764k data, 28k init) Swansea University Computer Society NET3.039 for Linux 2.1 NET3: Unix domain sockets 0.16 for Linux NET3.038. Swansea University Computer Society TCP/IP for NET3.037 IP Protocols: ICMP, UDP, TCP Initializing RT netlink socket VFS: Diskquotas version dquot_5.6.0 initialized CPU: Intel Pentium 133 Mhz stepping C Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX Starting kswapd v 1.23 Serial driver version 4.24 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A PIIX: IDE controller on PCI bus 0 function 57 PIIX: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:pio, hdd:pio hda: WDC AC36400L, ATA DISK drive hdc: WDC AC36400L, ATA DISK drive hdd: Seagate Technology 1275MB - ST31276A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: WDC AC36400L, 6149MB w/256kB Cache, CHS=13328/15/63, DMA hdc: WDC AC36400L, 6149MB w/256kB Cache, CHS=13328/15/63, DMA hdd: Seagate Technology 1275MB - ST31276A, 1221MB w/0kB Cache, CHS=2482/16/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 md: starting 4 kernel threads eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 18 f6 f1, IRQ 10. 3c509.c:1.07 6/15/95 becker@cesdis.gsfc.nasa.gov Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: hdc2 hdc3 hdc4 < hdc5 hdc6 > hdd: hdd1 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 28k freed Adding Swap: 64256k swap-space (priority 1) Adding Swap: 64252k swap-space (priority 1) REGISTER_DEV hda6 to md1 done REGISTER_DEV hdc6 to md1 done REGISTER_DEV hdd1 to md1 done raid0 personality registered raid0 : Allocating 856 bytes for hash. eth0: Setting Rx mode to 1 addresses. shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_swap_in: id=1 too big. proc mem corrupted shm_open: unused id=1 PANIC
___________________________________________________________________________
simple is elegant mrnick.binary9.net nicholas@binary9.net ___________________________________________________________________________
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |