lkml.org 
[lkml]   [1998]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: CONFIG_PCI_BIOS in 2.1.132
    Hi Michael.

    Rest of email will be dealt with later, I have to rush back to work...

    >> The only one that bears any relation to this point would appear to
    >> be the comment dated 131197, which basically states that a line of
    >> output is produced for each of the options in a choice list.

    > Yes, that is the comment. It means that if you turn on
    > CONFIG_PCI_GOBIOS, then you get the following output:

    > CONFIG_PCI_GOBIOS=y
    > CONFIG_PCI_GODIRECT=n
    > CONFIG_PCI_GOANY=n

    >> I had assumed such to be the case, with the usual "option=y" for
    >> the selected option, and comments for the remaining options, and I
    >> see this is indeed the case in the .config file produced.

    > Can you please check that again? I am totally sure that Configure
    > and Menuconfig produce "=n" lines, not "# is not set" lines. I am
    > also very sure that xconfig works this way, too.

    > If you have any kind of .config file with "# is not set" for a
    > choice list, I would like to see it, because that shouldn't happen
    > in 2.1.XX.

    Attached is the .config file produced by "make menuconfig" in
    2.1.132ac13 - you will note that the output produced does indeed show
    comments for the "not set" options...

    I also tried it with the other choice options in that set, and the
    comments are there whatever option is selected.

    >> For reference, a corrected version thereof is enclosed with this
    >> email...perhaps you could check this one out and advise whether it
    >> works or not?

    > I proofread it. I don't have time to test it today.

    > The Config.in section looks fine, except that the 'unset' line
    > isn't going to work in xconfig. Actually, except for the 'unset'
    > line, it identical to the patch I posted yesterday morning. :)

    That "unset" line was inserted by Linus, not me - and, as per the
    missive he posted to you in the linux-kernel list, it IS necessary, so
    it's "make xconfig" that's in the wrong here...

    > We do need help text, but I don't think the help text needs to talk
    > about the internal options.

    Again, that was Linus' suggestion...I tend to bow down to experts like
    him...

    Best wishes from Riley.
    #
    # Automatically generated by make menuconfig: don't edit
    #

    #
    # Code maturity level options
    #
    # CONFIG_EXPERIMENTAL is not set

    #
    # Processor type and features
    #
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    CONFIG_M586=y
    # CONFIG_M686 is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_SMP=y

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODVERSIONS=y
    CONFIG_KMOD=y

    #
    # General setup
    #
    CONFIG_NET=y
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_QUIRKS=y
    CONFIG_PCI_OLD_PROC=y
    # CONFIG_MCA is not set
    CONFIG_SYSVIPC=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_MISC=y
    # CONFIG_PARPORT is not set
    # CONFIG_APM is not set

    #
    # Plug and Play support
    #
    # CONFIG_PNP is not set

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=y
    CONFIG_BLK_DEV_IDE=y
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    CONFIG_BLK_DEV_CMD640=y
    # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    CONFIG_BLK_DEV_RZ1000=y
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_IDE_CHIPSETS is not set
    # CONFIG_BLK_DEV_LOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_MD is not set
    # CONFIG_BLK_DEV_RAM is not set
    # CONFIG_BLK_DEV_XD is not set
    CONFIG_PARIDE_PARPORT=y
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_DEV_HD is not set

    #
    # Networking options
    #
    CONFIG_PACKET=y
    # CONFIG_NETLINK is not set
    # CONFIG_FIREWALL is not set
    # CONFIG_NET_ALIAS is not set
    # CONFIG_FILTER is not set
    CONFIG_UNIX=y
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_IP_ROUTER is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_ALIAS is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_RARP is not set
    CONFIG_IP_NOSR=y
    CONFIG_SKB_LARGE=y
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set

    #
    # SCSI support
    #
    CONFIG_SCSI=y
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_BLK_DEV_SR is not set
    # CONFIG_CHR_DEV_SG is not set
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_CONSTANTS=y
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AHA1740 is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_SCSI_AM53C974 is not set
    # CONFIG_SCSI_MEGARAID is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_DMA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_NCR53C7xx is not set
    CONFIG_SCSI_NCR53C8XX=y
    CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
    CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
    CONFIG_SCSI_NCR53C8XX_SYNC=20
    # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
    # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PCI2000 is not set
    # CONFIG_SCSI_PCI2220I is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_SEAGATE is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=m
    # CONFIG_EQUALIZER is not set
    CONFIG_NET_ETHERNET=y
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set
    # CONFIG_NET_ISA is not set
    CONFIG_NET_EISA=y
    # CONFIG_PCNET32 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_DE4X5 is not set
    # CONFIG_DEC_ELCP is not set
    # CONFIG_DGRS is not set
    CONFIG_EEXPRESS_PRO100=y
    # CONFIG_NE2K_PCI is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_NET_POCKET is not set
    # CONFIG_FDDI is not set
    # CONFIG_DLCI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_RADIO is not set
    # CONFIG_TR is not set
    # CONFIG_HOSTESS_SV11 is not set
    # CONFIG_WAN_DRIVERS is not set
    # CONFIG_LAPBETHER is not set
    # CONFIG_X25_ASY is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_SERIAL=y
    # CONFIG_SERIAL_CONSOLE is not set
    # CONFIG_SERIAL_EXTENDED is not set
    # CONFIG_SERIAL_NONSTANDARD is not set
    CONFIG_UNIX98_PTYS=y
    CONFIG_UNIX98_PTY_COUNT=256
    CONFIG_MOUSE=y
    # CONFIG_ATIXL_BUSMOUSE is not set
    # CONFIG_BUSMOUSE is not set
    # CONFIG_MS_BUSMOUSE is not set
    CONFIG_PSMOUSE=y
    CONFIG_82C710_MOUSE=y
    # CONFIG_PC110_PAD is not set
    # CONFIG_QIC02_TAPE is not set
    # CONFIG_WATCHDOG is not set
    # CONFIG_RTC is not set
    # CONFIG_VIDEO_DEV is not set
    # CONFIG_NVRAM is not set
    # CONFIG_JOYSTICK is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set

    #
    # Filesystems
    #
    # CONFIG_QUOTA is not set
    # CONFIG_MINIX_FS is not set
    CONFIG_EXT2_FS=y
    CONFIG_ISO9660_FS=y
    # CONFIG_JOLIET is not set
    # CONFIG_FAT_FS is not set
    # CONFIG_MSDOS_FS is not set
    # CONFIG_UMSDOS_FS is not set
    # CONFIG_VFAT_FS is not set
    CONFIG_PROC_FS=y
    CONFIG_NFS_FS=y
    CONFIG_NFSD=y
    # CONFIG_NFSD_SUN is not set
    CONFIG_SUNRPC=y
    CONFIG_LOCKD=y
    # CONFIG_CODA_FS is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_NTFS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_AUTOFS_FS=y
    # CONFIG_UFS_FS is not set
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_SMD_DISKLABEL is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    CONFIG_DEVPTS_FS=y
    # CONFIG_MAC_PARTITION is not set
    # CONFIG_NLS is not set

    #
    # Console drivers
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_VIDEO_SELECT is not set

    #
    # Sound
    #
    # CONFIG_SOUND is not set

    #
    # Kernel hacking
    #
    # CONFIG_MAGIC_SYSRQ is not set
    \
     
     \ /
      Last update: 2005-03-22 13:46    [W:0.045 / U:2.820 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site