lkml.org 
[lkml]   [1998]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Linux 2.0.36pre22

I've got a friend with a Tyan Dual PII board with on board sound.
(vibra16)

He's currently running 2.1.125+ac?.

Isapnp reports that the *16bit* dma for the card can only be 0,1,3...

The SB module wont allow you to set dma16=3 (cause that's not a 16bit
dma). If you leave the dma16 out the card works fine but the driver
bitches whenever he plays a sound.

Does this issue exist in 2.0.36pre22? If so it should be a minor issue to
resolve.

On Sat, 14 Nov 1998, Alan Cox wrote:

>
> o Fix IDE maintainers email
> o Small security/hangup fix for thge cyclades driver
>
> This one is the final cut. You have 24 hours to scream if you break it. THen
> it goes to Linus for final approval
>
> ftp://ftp.linux.org.uk/pub/linux/alan/2.0.36pre/...
>
> Alan
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:45    [W:0.079 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site