lkml.org 
[lkml]   [1998]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: AIC 7880 timeouts w/SMP
From
Date
>>>>> "Frank" == Frank Sweetser <rasmusin@paramount.ind.wpi.edu> writes:

Frank> kernel 2.1.126 and 2.1.127pre3, a dual p2 machine with an
Frank> AHA 2940 and an AIC 7880 onboard. when the kernel is
Frank> compiled UP, it works fine, but when compiled SMP, the 7880
Frank> simply spits out a bunch of "aborting command due to
Frank> timeout" messages, and then the SCSI bus is continously
Frank> reset. the 2940 works fine either way. this happens
Frank> regardless of what's plugged into the 7880. the 7880
Frank> reports bios version 1.26sP7. i can provide any more
Frank> information (more detailed copying down of error messages,
Frank> etc) if needed. any help at all is apreciated!

I also get this behavior on a single-processor p2 machine with an AHA
2940 with a kernel compiled for SMP.

--
Brought to you by the letters N and W and the number 8.
"If you turn both processors off, you will have to reboot." -- The Be Book
Debian GNU/Linux -- where do you want to go tomorrow? http://www.debian.org/
I'm on FurryMUCK as Che, and EFNet and YiffNet IRC as Che_Fox.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:45    [W:0.074 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site