lkml.org 
[lkml]   [1998]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.0.36pre13 vs Epson 800 (lp driver)
    Date
    > > Tested my Epson 800 printer on 2.0.36pre13:
    > > Works fine on polling. On an interrupt, prints about 1/3
    > > of a page and stops or becomes _very_ slow.
    >
    > Did interrupt mode ever work fine with that printer. I've never really
    > touched the interrupt driven side of it at all

    Not in any of my tests, but I have not tested interrups
    very carefully and only started with 2.0.34.

    poll interrupt Comments
    2.0.34 ok ?
    2.0.35 bad bad fixed polling by using 2.0.34 driver
    2.0.36pre13 ok bad

    Doug

    --
    Douglas B. Paul
    dbp@alum.mit.edu

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:44    [W:0.023 / U:0.356 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site