Messages in this thread | | | Date | Mon, 26 Oct 1998 16:38:44 +0200 (EET) | From | Robert-Velisav MICIOVICI <> | Subject | Re: problems with NOT-UDMA ide hdd on linux (2 years old Seagate...) |
| |
On Mon, 26 Oct 1998, Mark Lord wrote:
> Date: Mon, 26 Oct 1998 08:18:46 -0500 > From: Mark Lord <mlord@pobox.com> > To: Robert-Velisav MICIOVICI <roby@lcjdap.soroscj.ro> > Cc: Andre M. Hedrick <hedrick@Astro.Dyer.Vanderbilt.Edu>, linux-kernel@vger.rutgers.edu > Subject: Re: problems with NOT-UDMA ide hdd on linux (2 years old Seagate...) > > Robert-Velisav MICIOVICI wrote: > ... > > Kernelul at boot says: (Linux v. 2.1.125) > > > > hdc: probing with STATUS(0xff) instead of ALTSTATUS(0x50) > > hdc: ST31720A, ATA DISK drive > > > > When I try mounting one of its partitions it starts to make a horrible > > noise and spits repeatedly with errors on the console whyle trying to > > miount (the drive gets mounted successfully but I am afraid to write on > > it): > > > > hdc: unexpected_intr: status=0x58 { DriveReady SeekComplete DataRequest } > > hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } > > hdd: DMA disabled > > hdc: drive not ready for command > > ide1: reset: success > ... > > Model=ST31720A, FwRev=0.42, SerialNo=GFB4YB8 > ... > > tDMA={min:120,rec:120}, DMA modes: *mword0 mword1 mword2 > > IORDY=on/off, tPIO={min:383,w/IORDY:120}, PIO modes: mode3 mode4 > ... > > Probably have the wrong DMA mode selected in drive. > > Tell your BIOS to select DMA mode2, > or have linux do: hdparm -X34 /dev/hdc > before otherwise accessing the drive. > > -- > mlord@pobox.com
After doing hdparm -X34 /dev/hdc
[root@lcjdap ~]# hdparm -X34 /dev/hdc
/dev/hdc: setting xfermode to 34 (multiword DMA mode2) [root@lcjdap ~]# mount /dev/hdc3 /mnt/hd-seagate/ hdc: unexpected_intr: status=0x58 { DriveReady SeekComplete DataRequest } hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } hdc: drive not ready for command ide1: reset: success hdc: unexpected_intr: status=0x58 { DriveReady SeekComplete DataRequest } hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } hdc: drive not ready for command ide1: reset: success hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } hdc: drive not ready for command ide1: reset: success hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } hdc: drive not ready for command ide1: reset: success
Gave this err about 25 times...
-- SysAdm @ LCJDAP "Alexandru Papiu Ilarian" Highschool's Network Administrator
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |