lkml.org 
[lkml]   [1998]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectKernel freeze on boot (.123-.125) in IDE init
I'm currently running 2.1.113, and trying the newest ones.  However,
since 2.1.123, it's been freezing during the IDE Partition check.
I've tried a minimal config, w/o scsi sound or anything extraneous
and monolithic. I also have tried 2.1.126-pre2 and 2.1.126-pre2ac1,
with the same results.

Machine:
430HX w/Petium 225MMX
using Promise Ultra/33 PCI controller for ide2/3

It freezes after displaying 'hda:' in the partition check.

Here's the pertinent part of dmesg and /proc/pci from under 2.1.113

PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
PDC20246: IDE controller on PCI bus 00 dev 58
PDC20246: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x6500-0x6507, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x6508-0x650f, BIOS settings: hdg:pio, hdh:DMA
hda: IBM-DAQA-33240, ATA DISK drive
hdb: WDC AC31600H, ATA DISK drive
hdc: MATSHITA CR-585, ATAPI CDROM drive
hde: IBM-DHEA-38451, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x6100-0x6107,0x6206 on irq 10
hda: IBM-DAQA-33240, 3098MB w/96kB Cache, CHS=787/128/63, DMA
hdb: WDC AC31600H, 1549MB w/128kB Cache, CHS=787/64/63, DMA
hde: IBM-DHEA-38451, 8063MB w/472kB Cache, CHS=16383/16/63, UDMA
Partition check:
hda: hda1 < hda5 > hda3 hda4
hdb: hdb1 hdb4 < hdb5 hdb6 >
hde: [PTBL] [1027/255/63] hde1 hde2 hde3 < hde5 hde6 hde7 >

% cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 82439HX Triton II (rev 3).
Medium devsel. Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371SB PIIX3 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xf000 [0xf001].
Bus 0, device 11, function 0:
RAID bus controller: Promise Technology IDE UltraDMA/33 (rev 1).
Medium devsel. IRQ a. Master Capable. Latency=32.
I/O at 0x6100 [0x6101].
I/O at 0x6204 [0x6205].
I/O at 0x6300 [0x6301].
I/O at 0x6404 [0x6405].
I/O at 0x6500 [0x6501].
Bus 0, device 13, function 0:
Ethernet controller: 3Com 3C905 100bTX (rev 0).
Medium devsel. IRQ a. Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0x6600 [0x6601].
Bus 0, device 15, function 0:
VGA compatible controller: Matrox Millennium (rev 1).
Medium devsel. Fast back-to-back capable. IRQ b.
Non-prefetchable 32 bit memory at 0xe0800000 [0xe0800000].
Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
What other information would be useful?

Thanks,
-- Daniel Nash
"Waiter, Waiter, there's an avocado in my guacamole." - Me

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:45    [from the cache]
©2003-2011 Jasper Spaans