Messages in this thread | | | Date | Wed, 21 Oct 1998 13:14:43 -0500 (CDT) | From | "Andre M. Hedrick" <> | Subject | Re: IDE tape and SMP |
| |
This is a real bug folks and I am looking into the issue.
ide-tape: ht0: I/O error, pc = a, key = 9, asc = 3, ascq = c tar: Cannot write to /dev/ht0: I/O error hdd: irq timeout: status=0xd0 { Busy } hdd: ATAPI reset complete ide-tape: Couldn't write a filemark
ide-tape: ht0: DSC timeout hdd: ATAPI reset complete ide-tape: ht0: I/O error, pc = 1, key = 2, asc = 4, ascq = 1
I am using a SM P6DNF and 124 SMP faults......... I forgot the tast kernel that there was not an error under SMP, but the hunt is on..................release the hounds..........
On Tue, 20 Oct 1998, Douglas Ridgway wrote:
> > I seem to be having problems with an HP Colorado 8 GB IDE tape under > 2.1.125 SMP. The MB is an ASUS P2L97DS, equipped with two PII 233s, my > system has one disk on the onboard 7888 SCSI, one disk on the first IDE, > and the tape drive on the second IDE. The symptoms are that the tar to > /dev/ht0 fails with an I/O error after about writing a GB or so, although > small writes seem to work fine. > > The drive and tapes are brand new. A full backup under 2.1.125 without SMP > but otherwise configured identically seems to have worked fine. Any ideas, > or suggestions as to where this should be reported? > > Here's some of the boot log: > > Oct 19 08:46:14 ursula kernel: PIIX4: IDE controller on PCI bus 00 dev 21 > Oct 19 08:46:14 ursula kernel: PIIX4: not 100ative mode: will probe irqs > later > Oct 19 08:46:14 ursula kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS > settings: > hda:DMA, hdb:pio > Oct 19 08:46:14 ursula kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS > settings: > hdc:DMA, hdd:pio > Oct 19 08:46:14 ursula kernel: hda: Maxtor 90680D4, ATA DISK drive > Oct 19 08:46:14 ursula kernel: hdc: HP COLORADO 8GB, ATAPI TAPE drive > Oct 19 08:46:14 ursula kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Oct 19 08:46:14 ursula kernel: ide1 at 0x170-0x177,0x376 on irq 15 > Oct 19 08:46:14 ursula kernel: hda: Maxtor 90680D4, 6485MB w/256kB Cache, > CHS=82 > 6/255/63, UDMA > Oct 19 08:46:14 ursula kernel: ide-tape: hdc: overriding > capabilities->speed (as > suming 650KB/sec) > Oct 19 08:46:14 ursula kernel: ide-tape: hdc: overriding > capabilities->max_speed > (assuming 650KB/sec) > Oct 19 08:46:14 ursula kernel: ide-tape: hdc <-> ht0, 650KBps, 16*32kB > buffer, 3 > 200kB pipeline, 100ms tDSC > > > and here's part of /var/log/messages: > > Oct 19 01:11:12 ursula kernel: hdc: irq timeout: status=0xd8 { Busy } > Oct 19 01:11:13 ursula kernel: hdc: ATAPI reset complete > Oct 19 01:11:13 ursula kernel: ide-tape: ht0: I/O error, pc = a, key = > 6, asc > = 29, ascq = 0 > Oct 19 01:11:13 ursula kernel: ide-tape: ht0: I/O error, pc = a, key = > 2, asc > = 4, ascq = 1 > Oct 19 01:11:15 ursula last message repeated 178 times > Oct 19 01:11:15 ursula kernel: ide-tape: ht0: I/O error, pc = 10, key = > 2, asc > = 4, ascq = 1 > Oct 19 01:11:15 ursula kernel: ide-tape: Couldn't write a filemark > > > Thank you, > > doug. > >
Cheers, Andre Hedrick The IDE-FNG for Linux The APC UPS Specialist for Linux
http://www.dyer.vanderbilt.edu/server/udma/ http://www.dyer.vanderbilt.edu/server/apcupsd/ SUSPENDED
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |