This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Thu Apr 25 12:42:18 2024 Received: from entropy.muc.muohio.edu (entropy.muc.muohio.edu [134.53.213.10]) by herbie.ucs.indiana.edu (8.8.8/8.8.8) with ESMTP id MAA09986 for ; Fri, 2 Oct 1998 12:31:17 -0500 (EST) Received: from vger.rutgers.edu (vger.rutgers.edu [128.6.190.2]) by entropy.muc.muohio.edu (8.9.0/8.8.7) with ESMTP id NAA27717; Fri, 2 Oct 1998 13:26:10 -0400 Received: by vger.rutgers.edu id <154551-22414>; Fri, 2 Oct 1998 08:29:02 -0400 Received: from vmsd.csd.mu.edu ([134.48.20.5]:3544 "EHLO VMSD.CSD.MU.EDU" ident: "NO-IDENT-SERVICE[2]") by vger.rutgers.edu with ESMTP id <154325-22414>; Fri, 2 Oct 1998 08:28:41 -0400 Received: from vms.csd.mu.edu ([134.48.101.43]) by vms.csd.mu.edu (PMDF V5.1-10 #27588) with ESMTP id <01J2HTX8P3WU8Y5TP6@vms.csd.mu.edu> for linux-kernel@vger.rutgers.edu; Fri, 2 Oct 1998 12:22:35 CST Date: Fri, 02 Oct 1998 12:22:31 -0500 From: "Justin A. Kolodziej" <4wg7kolodzie@vmsb.csd.mu.edu> Subject: [Fwd: PROBLEM: 3Dfx voodoo1 + ncr53c860 = messed up filesystem] To: linux-kernel@vger.rutgers.edu Message-Id: <36150BD7.AD6E4289@vms.csd.mu.edu> Organization: Marquette University http://www.marquette.edu Mime-Version: 1.0 X-Mailer: Mozilla 4.5b2 [en] (X11; I; Linux 2.1.123 i686) Content-Type: multipart/mixed; boundary="------------DAF4AD192001A0DE3C20578A" X-Accept-Language: en X-Orcpt: rfc822;linux-kernel@vger.rutgers.edu X-Envid: 01J2HTX8SBN48Y5TP6@vms.csd.mu.edu Sender: owner-linux-kernel@vger.rutgers.edu Precedence: bulk Reply-To: linux-kernel@vger.rutgers.edu X-Loop: majordomo@vger.rutgers.edu This is a multi-part message in MIME format. --------------DAF4AD192001A0DE3C20578A Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Thought maybe you could help out with this, as it looks like a possible kernel problem. If you wish, send replies to the 3dfx.glide.linux newsgroup at news.3dfx.com, or to me or the_noid@dds.nl Your choice. Justin A. Kolodziej -- Easiest Color To Solve On A Rubik's Cube: Black. Simply remove all the little colored stickers on the cube, and each of side of the cube will now be the original color of the plastic underneath -- black. According to the instructions, this means the puzzle is solved. -- Steve Rubenstein --------------DAF4AD192001A0DE3C20578A Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Path: news.3dfx.com!not-for-mail From: Hylke Newsgroups: 3dfx.glide.linux Subject: PROBLEM: 3Dfx voodoo1 + ncr53c860 = messed up filesystem Date: Thu, 01 Oct 1998 16:09:51 +0200 Organization: 3Dfx Interactive Message-ID: <36138D2F.19C5CFA9@dds.nl> NNTP-Posting-Host: flex124.biot.wau.nl Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 4.5b1 [en] (Win95; I) X-Accept-Language: en Xref: news.3dfx.com 3dfx.glide.linux:3988 Hi, I've got some serious problems with my NCR53c860 (PCI) SCSI controller and my 3Dfx VooDoo 1 (Pure3D). When I'm using my 3Dfx card (playing qake, running a demo) and I write to my SCSI disk it results in SCSI errors, EXT2 FS errors and duplicate/illegal blocks. It only happens when WRITING to the SCSI disk WHILE using the 3Dfx card. setup: AMD K6-2 3D 300/100 FIC VA503+ 64Mb SDRAM, PC100 Stealth 64 Video Vram (2Mb, S3 968) Cannopus Pure3D / on hdb1 /home on sda2 /usr on sda1 swap on hdb3 tests by doing 'make install' from /home/installs/gtk+-1.0.5/ while running GLquake, squake, other CPU/MEM intensive tasks. /home mounted readonly, /usr RW (otherwise installing is a bit difficult ;-) I tried tuning down the SCSI controller, PCI settings in the BIOS, no effect. Tried Linux 2.0.33, 2.0.34, 2.0.35, 2.0.36pre12. All give errors. Does anyone have a clue? Thanx, Hylke van der Schaaf hylke@lx.student.wau.nl output of /proc/*, and some errors in /var/lib/messages and /var/lib/syslog, dmesg. /proc/cpuinfo: processor : 0 cpu : 586 model : AMD-K6(tm) 3D processor vendor_id : AuthenticAMD stepping : A fdiv_bug : no hlt_bug : no f00f_bug : no fpu : yes fpu_exception : yes cpuid : yes wp : yes flags : fpu vme de pse tsc msr mce cx8 syscr mmx 3dnow bogomips : 599.65 /proc/interrupts: 4: cascade 0: 247499 timer 1: 1779 keyboard 2: 0 cascade 10: 1135 3c509 11: 4608 + ncr53c8xx 13: 1 math error 14: 11038 + ide0 15: 0 + ide1 /proc/ioports: 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-009f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : npu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0300-030f : 3c509 0376-0376 : ide1 03c0-03df : vga+ 03f0-03f5 : floppy 03f6-03f6 : ide0 03f7-03f7 : floppy DIR 03f8-03ff : serial(auto) 6c00-6c7f : ncr53c8xx /proc/pci: PCI devices found: Bus 0, device 10, function 0: Multimedia video controller: 3Dfx Voodoo (rev 2). Fast devsel. Fast back-to-back capable. IRQ 255. Prefetchable 32 bit memory at 0xe8000000. Bus 0, device 9, function 0: VGA compatible controller: S3 Inc. Vision 968 (rev 0). Medium devsel. IRQ 9. Non-prefetchable 32 bit memory at 0xe4000000. Bus 0, device 8, function 0: SCSI storage controller: NCR 53c860 (rev 2). Medium devsel. IRQ 11. Master Capable. Latency=64. MinGnt=8.Max Lat=64. I/O at 0x6c00. Non-prefetchable 32 bit memory at 0xe9000000. Bus 0, device 7, function 1: IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. I/O at 0x6400. Bus 0, device 7, function 0: ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 65). Medium devsel. Master Capable. No bursts. Bus 0, device 1, function 0: PCI bridge: VIA Technologies Unknown device (rev 0). Vendor id=1106. Device id=8598. Medium devsel. Master Capable. No bursts. Min Gnt=4. Bus 0, device 0, function 0: Host bridge: VIA Technologies VT 82C597 Apollo VP3 (rev 4). Medium devsel. Fast back-to-back capable. Master Capable. Latency=16. Prefetchable 32 bit memory at 0xe0000000. /proc/scsi: Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: QUANTUM Model: FIREBALL SE4.3S Rev: PJ0A Type: Direct-Access ANSI SCSI revision: 02 /proc/scsi/ncr53c8xx/0: General information: Chip NCR53C860, device id 0x6, revision id 0x2 IO port address 0x6c00, IRQ number 11 Using memory mapped IO at virtual address 0x4805000 Synchronous period factor 12, max commands per lun 4 Profiling information: num_trans = 3990 num_kbytes = 13820 num_disc = 0 num_break = 1 num_int = 16 num_fly = 3990 ms_setup = 280 ms_data = 32690 ms_disc = 0 ms_post = 120 /proc/version: Linux version 2.0.36 (root@flex055) (gcc version 2.7.2.3) #1 Wed Sep 30 14:38:08 CEST 1998 Some of the errors on /var/log/syslog, most come with lots, only 1 displayed: Sep 27 19:05:58 flex055 kernel: EXT2-fs error (device 08:01): ext2_free_blocks: Freeing blocks not in datazone - block = 134757841,count = 1 Sep 29 18:35:17 flex055 kernel: EXT2-fs error (device 08:01): ext2_check_blocks_bitmap: Wrong free blocks count for group 41, stored = 3144, counted = 7620 Sep 29 21:48:23 flex055 kernel: EXT2-fs error (device 08:01): ext2_find_entry: bad entry in directory #413713: rec_len % 4 != 0 - offset=0, inode=556277862, rec_len=28022, name_len=8301 Sep 30 20:39:15 flex055 kernel: EXT2-fs error (device 08:01): ext2_check_blocks_bitmap: Wrong free blocks count in super block, stored = 1558419, counted = 1558629 Sep 30 20:39:15 flex055 kernel: EXT2-fs error (device 08:01): ext2_check_blocks_bitmap: Wrong free blocks count for group 74, stored = 7223, counted = 7433 The same for /var/log/messages: Sep 29 18:33:25 flex055 kernel: ncr53c860-0-<6,0>: phase change 2-110@002df828 resid=4. Sep 29 18:33:25 flex055 kernel: f device Sep 29 18:33:25 flex055 kernel: 08:02: rw=0, want=687946754,limit=2102730 Sep 29 18:33:25 flex055 kernel: attempt to access beyond end of device Sep 29 18:33:25 flex055 kernel: 08:02: rw=0, want=486613762,limit=2102730 Sep 29 18:33:25 flex055 kernel: attempt to access beyond end of device Sep 30 20:34:28 flex055 kernel: ncr53c860-0-<6,0>: phase change 2-3 10@00096c20 resid=5. Sep 30 20:34:28 flex055 kernel: ncr53c860-0-<6,0>: phase change 2-1 10@00096c20 resid=4. output of dmesg: Memory: sized by int13 088h Console: 8 point font, 344 scans Console: colour VGA+ 132x43, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000faf30 pcibios_init : BIOS32 Service Directory entry at 0xfb3b0 pcibios_init : PCI BIOS revision 2.10 entry at 0xfb3e0 Probing PCI hardware. Calibrating delay loop.. ok - 599.65 BogoMIPS Memory: 63232k/65536k available (696k kernel code, 384k reserved, 1224k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: IGMP, ICMP, UDP, TCP Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.36 (root@flex055) (gcc version 2.7.2.3) #1 Wed Sep 30 14:38:08 CEST 1998 Starting kswapd v 1.4.2.2 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A hda: QUANTUM SIROCCO1700A, 1628MB w/75kB Cache, CHS=827/64/63 hdb: WDC AC31600H, 1549MB w/128kB Cache, CHS=787/64/63 hdc: 655A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ncr53c8xx: at PCI bus 0, device 8, function 0 ncr53c8xx: 53c860 detected ncr53c860-0: rev=0x02, base=0xe9000000, io_port=0x6c00, irq=11 ncr53c860-0: NCR clock is 80074KHz, 80074KHz ncr53c860-0: ID 7, Fast-20, Parity Checking ncr53c860-0: restart (scsi reset). scsi0 : ncr53c8xx - revision 2.5f.1 scsi : 1 host. Vendor: QUANTUM Model: FIREBALL SE4.3S Rev: PJ0A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 6, lun 0 scsi : detected 1 SCSI disk total. ncr53c860-0-<6,0>: asynchronous. SCSI device sda: hdwr sector= 512 bytes. Sectors= 8418816 [4110 MB] [4.1 GB] eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 60 08 20 f1 c3, IRQ 10. 3c509.c:1.16 2/3/98 becker@cesdis.gsfc.nasa.gov Partition check: sda: sda1 sda2 hda: hda1 hda2 < hda5 hda6 > hdb: hdb1 hdb2 hdb3 VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 64508k swap-space (priority -1) eth0: Setting Rx mode to 1 addresses. --------------DAF4AD192001A0DE3C20578A-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/