Messages in this thread | | | From | Marcus Meissner <> | Date | Tue, 5 Aug 1997 20:19:35 +0200 (MET DST) | Subject | Re: New pre-2.0.31 patches.. |
| |
>Ok, > > now is the time for people to start verifying that the new pre-2.0.31 >patches so far actually work. I'm making the pre-patches available in my >normal "testing" directory on ftp.kernel.org, under pub/linux/kernel. > >Currently the pre-patches have there larger patches: > > - updated ide, aic7xxx and tulip.c drivers
Hi.
I've tried the 2.0.30-3 patch. Seems to work ok first (except some <6> which shouldn't be there) seen below. (termination is my fault, but it works)
When I do 'less /proc/scsi/aic7xxx/0' and browse around a bit, the kernel crashes for good (not exactly reproduceable, but it does.)
Dmesg output and .config appended.
Ciao, Marcus
Console: 8 point font, 480 scans Console: colour VGA+ 80x60, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000f8440 pcibios_init : BIOS32 Service Directory entry at 0xf7e90 pcibios_init : PCI BIOS revision 2.10 entry at 0xf7ec0 Probing PCI hardware. Calibrating delay loop.. ok - 53.25 BogoMIPS Memory: 30948k/32768k available (688k kernel code, 384k reserved, 748k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: ICMP, UDP, TCP Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.31 (root@jet) (gcc version 2.7.2.1) #3 Tue Aug 5 19:14:11 MEST 1997 Starting kswapd v 1.4.2.2 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A Sound initialization started <Gravis UltraSound 3.4 (1024k)> at 0x240 irq 5 dma 1,0 Warning! Invalid GUS MAX DMA Sound initialization complete Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 12 aic7xxx: Warning - detected auto-termination. Please verify driver<6> detected settings and use manual termination if necessary.<6>aic7xxx: BIOS enabled, IO Port 0xe000, IO Mem 0xf9800000, IRQ 11, Revision B aic7xxx: Single Channel, SCSI ID 7, 16/255 SCBs, QFull 16, QMask 0x1f scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2 scsi : 1 host. scsi0: Scanning channel A for devices. Vendor: ARCHIVE Model: Python 25601-XXX Rev: 2.63 Type: Sequential-Access ANSI SCSI revision: 02 Detected scsi tape st0 at scsi0, channel 0, id 0, lun 0 Vendor: SANYO Model: CRD-254S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 Vendor: IBM Model: DPES-31080 Rev: S31Q Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 2, lun 0 Vendor: IBM Model: DORS-32160 Rev: WA6A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0 scsi : detected 1 SCSI tape 1 SCSI cdrom 2 SCSI disks total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 2118144 [1034 MB] [1.0 GB] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB] Partition check: sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 33788k swap-space (priority -1)
CONFIG_EXPERIMENTAL=y CONFIG_MODULES=y CONFIG_NET=y CONFIG_PCI=y CONFIG_PCI_OPTIMIZE=y CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_KERNEL_ELF=y CONFIG_M586=y CONFIG_BLK_DEV_FD=y CONFIG_INET=y CONFIG_IP_NOSR=y CONFIG_SKB_LARGE=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_TAGGED_QUEUEING=y CONFIG_AIC7XXX_CMDS_PER_LUN=8 CONFIG_AIC7XXX_PAGE_ENABLE=y CONFIG_AIC7XXX_PROC_STATS=y CONFIG_AIC7XXX_RESET_DELAY=2 CONFIG_EXT2_FS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_FS=y CONFIG_ISO9660_FS=y CONFIG_SERIAL=y CONFIG_SOUND=y CONFIG_GUS=y CONFIG_AUDIO=y GUS_BASE=250 GUS_IRQ=15 GUS_DMA=6 GUS_DMA2=7 DSP_BUFFSIZE=65536
| |