[lkml]   [1997]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: rescan scsi
On Fri, 20 Jun 1997, Gerald Britton wrote:

> > Under Solaris/Linux/NetBSD/OpenBSD at the very least you can reprobe
> > individual devices or whole buses during runtime, no need for such
> is it possible to rescan the entire bus under Linux? i don't remember
> reading anything on doing this. the only interface for reprobing the scsi
> bus that i have heard about (or seen code in the kernel for) is the
> add/remove-single-device
> --
> Gerald Britton
Well yes. It seems that the add/remove-single-device hook is (can be) used
to re-scan the SCSI bus. Note that disconnecting, reconnecting to
a powered SCSI bus is risky. You can lose controllers and/or drives.
If one of the bus bits is being driven in one direction by one device
and in the other by another device (as can happen during a bus disturbance),
the chances are 100% that one of the interface chips will permanently
lose a bit. Luck will prevent this, but luck can't be counted upon.

Richard B. Johnson
Analogic Corporation
Email :,
Penguin : Linux version 2.1.42 on an i586 machine (66.15 BogoMips).
Warning : It's hard to stay on the trailing edge of technology.

 \ /
  Last update: 2005-03-22 13:39    [W:0.067 / U:16.132 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site