Messages in this thread | | | Date | Fri, 20 Jun 1997 13:15:33 -0400 (EDT) | From | Gerald Britton <> | Subject | Re: rescan scsi |
| |
> > echo "scsi add-single-device 0 0 1 0" > /proc/scsi/scsi > > > > will reprobe Card 0, Channel 0, Device 1, Lun 0, and add it if it is > > found. > > > Yikes! I was not aware that this was in the kernel. I sure hope there > is a disclaimer associated with this when one of the SCSI device bits is > pulling and another is pushing. You really should not disconnect or > connect a SCSI device when it is power up!
there are HotSwap scsi buses.. they are designed to allow you to safely insert devices into an operating scsi system. There shouldn't be any problem with hot swapping scsi devices, especially in one of these enclosures.
-- Gerald Britton gbritton@nih.gov
| |