lkml.org 
[lkml]   [1997]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
I got a bunch (few dozen over 8 hours) of these the other day on a P100
running 2.0.28 with a realtek PCI ne2k card during a backup/compare over
the network to this system's DAT. The source comments around
this printk make it sound like this isn't a very good thing to see.

eth0: Tx timed out, cable problem? TSR=0x6, ISR=0x0, t=27.
eth0: Tx timed out, cable problem? TSR=0x6, ISR=0x0, t=27.
eth0: Tx timed out, cable problem? TSR=0x6, ISR=0x0, t=26.

How bad are these errors, and should I start looking into putting a
different ethernet card in...or are there bugs in the 2.0.28 ne2k support
that have been fixed?

Bus 0, device 18, function 0:
Ethernet controller: Realtek 8029 (rev 0).
Medium devsel. IRQ 9.
I/O at 0x6100.

------------------------------------------------------------------
Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will
Network Administrator | be proof-read for $199/hr.
________Finger jlewis@inorganic5.fdt.net for PGP public key_______


\
 
 \ /
  Last update: 2005-03-22 13:38    [W:0.016 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site