Messages in this thread | | | Date | Thu, 18 Dec 1997 16:36:48 -0800 (PST) | From | Shane Wegner <> | Subject | Re: plip driver changes |
| |
Hi,
Ok as for arp, I use that strictly because the plip howto said to use it heh. I'm not sure if that could be the problem but I tried it without arp and I got the same thing. As for the mac address, I am not sure, perhapse it's in here.
continuum:~# ifconfig plip0 irq 7
continuum:~# ifconfig plip0 linux pointopoint dos arp up
continuum:~# route add dos plip0
continuum:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
dos * 255.255.255.255 UH 0 0 0 plip0
24.112.126.0 * 255.255.254.0 U 0 0 0 eth0
localnet * 255.0.0.0 U 0 0 0 eth1
loopback * 255.0.0.0 U 0 0 0 lo
default whalley2.net.ro 0.0.0.0 UG 0 0 0 eth0
continuum:~# ifconfig plip0
plip0 Link encap:Ethernet HWaddr FC:FC:0A:00:00:01
inet addr:10.0.0.1 P-t-P:10.0.0.2 Mask:0.0.0.0
UP POINTOPOINT RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 coll:0
Interrupt:7 Base address:0x378
continuum:~# On Thu, 18 Dec 1997, Alan Cox wrote:
> Date: Thu, 18 Dec 1997 23:39:36 +0000 (GMT) > From: Alan Cox <alan@lxorguk.ukuu.org.uk> > To: swegner@cln.etc.bc.ca > Cc: linux-kernel@vger.rutgers.edu > Subject: Re: plip driver changes > > > ifconfig plip0 irq 7 > > ifconfig plip0 linux pointopoint dos arp up > > route add dos plip0 > > > > Well that atleast didn't complain but I try to telnet from dos and nothing > > happens. Does anyone here know what's changed in that driver or what I'm > > doing wrong. It worked fine for the 2.0.x kernels. Thanks for your help. > > Several plip things changed. It also seems odd you have it pointopoint with arp. > First question - what MAC address does plip reporrt ? >
| |