Messages in this thread |  | | Date | Fri, 10 Jan 1997 15:27:33 +0100 | From | mab@hamburg ... | Subject | Re: CD-Changer |
| |
Roy P. Turner writes: > On Fri, 10 Jan 1997, Martin Bauer wrote: > > > Hi *, > > > > I hope this isn't too off-topic. > > > > I got a PIONEER DRM-624X cd-changer with 6 cd-magazine. When I > > boot the machine the kernel reports every slot as a seperate > > cdrom-drive (/dev/scd0../dev/scd5), ok! But if I try to mount e.g. /dev/scd0, the > > changer loads the specified CD waits several seconds, unloads > > the CD and then tells me the following story: > > > > # mount -r -t iso9660 /dev/scd0 /cdrom > > mount: wrong fs type, bad option, bad superblock on /dev/scd0, > > or too many mounted file systems > > > > I've had similar results with a cdrom changer. In my case, running > the same mount command again after the error got it to load. > > mount -t iso9660 /dev/scd0 /mnt/cdrom (gives an error) > Run the same command immediately and it mounts fine. > Not in my case! I tried it right after the error with the effect, that this time there was no try to load the CD and the error occured much faster!
Martin
------------------------------------------------------------------------------- Martin Bauer <mab@hamburg.germanlloyd.de>
Germanischer Lloyd AG, Vorsetzen 32, 20456 Hamburg, Germany phone/fax: +49-40-36149-564/721 -------------------------------------------------------------------------------
|  |