Messages in this thread |  | | Subject | Sound init patch doesn't work for me | From | Duncan Roe <> | Date | Tue, 10 Sep 1996 12:38:20 +1000 |
| |
Hi Hannu,
> - Always cold boot the machine.
Thanks for the tip! As long as I make sure to press the reset button during a reboot, it works fine.
I applied the patch you suggested (reversing the 2.0.4 -> 2.0.5 change), but it doesn't do a lot of good. Sure the machine doesn't lock, but the probe fails and there's no sound after booting is complete. That's after a *soft* reboot: after a hard reboot it *does* work but then it was working anyway.
I append the dmesg o/p so you can see the problem.
Have you any suggestion of some other change between 2.0.0 and 2.0.18 that might make it work again? I'd be happy to try any. I don't really want to have to press the reset button for ever and a day.
Cheers ... Duncan.
--- Output from dmesg :
Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) Calibrating delay loop.. ok - 33.18 BogoMIPS Memory: 30984k/32896k available (768k kernel code, 384k reserved, 760k data) This processor honours the WP bit even when in supervisor mode. Good. Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.12 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: ICMP, UDP, TCP Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.18 (dunc@dimstar) (gcc version 2.7.2.f.1) #11 Tue Sep 10 11:05:21 EST 1996 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16450 tty01 at 0x02f8 (irq = 3) is a 16450 tty03 at 0x02e8 (irq = 3) is a 16550A lp1 at 0x0378, (polling) Sound initialization started sb: Interrupt test on IRQ10 failed - device disabled <Yamaha OPL3 FM> at 0x388 Sound initialization complete Floppy drive(s): fd0 is 1.2M, fd1 is 1.44M Started kswapd v 1.4.2.2 <REST DELETED>
|  |