lkml.org 
[lkml]   [1996]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Subject2.0.19 unresolved symbols?
    Date
    From
    I can't figure out what I am doing wrong.  I didn't
    change my kernel configuration, and the patch
    from 2.0.18 to 2.0.19 shouldn't have effected
    the scsi modules I am using. Yet, 2.0.18's scsi
    modules work just fine, whereas 2.0.19's have
    unresolved symbols. They compile fine, just that
    they are unusable:
    # depmod -a
    *** Unresolved symbols in module /lib/modules/2.0.19/block/floppy.o
    *** Unresolved symbols in module /lib/modules/2.0.19/block/loop.o
    *** Unresolved symbols in module /lib/modules/2.0.19/scsi/scsi_mod.o
    *** Unresolved symbols in module /lib/modules/2.0.19/scsi/sd_mod.o
    *** Unresolved symbols in module /lib/modules/2.0.19/scsi/sr_mod.o
    *** Unresolved symbols in module /lib/modules/2.0.19/scsi/st.o
    #

    I don't get it. Any clues?

    BTW, to the person (I forget who) who asked about root md-devices,
    using initrd, I now have:
    LightHouse~:$ df
    Filesystem 1024-blocks Used Available Capacity Mounted on
    /dev/initrd 3963 3007 956 76% /initrd
    /dev/md0 604411 469960 128207 79% /
    /dev/hda3 149814 113208 36606 76% /usr/src
    atlantis:/usr/tgz 289465 227199 47316 83% /usr/tgz
    /dev/sdb4 6979 2655 3964 40% /boot/rd
    /boot/initrd 3963 3006 957 76% /boot/lo
    LightHouse~:$

    note the raid device on /. BTW, it is sad when booting a 1.6mb
    kernel+initrd.gz file from a network is faster than reading it
    from my local scsi disks. I never realized how slow bios was
    until I had to wait what seemed like at least a minute for
    1.6mb to be loaded from the scsi hd (initrd + kernel)...

    One problem though. The Documentation/initrd.txt no longer
    points to the proper location of the tgz file containing
    the 'freeramdisk' program. Please, if someone knows where
    this is let me know. Until then I have a 4mb ramdisk wasting
    memory.

    Anway, I would appreciate any suggestions on the unresolved
    symbols...
    --
    Todd Fries .. todd@miango.com


    #
    # Automatically generated make config: don't edit
    #

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    # CONFIG_MODVERSIONS is not set
    CONFIG_KERNELD=y

    #
    # General setup
    #
    # CONFIG_MATH_EMULATION is not set
    CONFIG_NET=y
    CONFIG_MAX_16M=y
    CONFIG_PCI=y
    CONFIG_PCI_OPTIMIZE=y
    CONFIG_SYSVIPC=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_JAVA=m
    CONFIG_KERNEL_ELF=y
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    CONFIG_M586=y
    # CONFIG_M686 is not set

    #
    # Floppy, IDE, and other block devices
    #
    CONFIG_BLK_DEV_FD=m
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_HD_IDE is not set
    # CONFIG_BLK_DEV_IDECD is not set
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDE_PCMCIA is not set
    CONFIG_BLK_DEV_CMD640=y
    CONFIG_BLK_DEV_CMD640_ENHANCED=y
    CONFIG_BLK_DEV_RZ1000=y
    CONFIG_BLK_DEV_TRITON=y
    # CONFIG_IDE_CHIPSETS is not set

    #
    # Additional Block Devices
    #
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_MD=m
    CONFIG_MD_LINEAR=m
    CONFIG_MD_STRIPED=m
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_INITRD=y
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_BLK_DEV_HD is not set

    #
    # Networking options
    #
    # CONFIG_FIREWALL is not set
    # CONFIG_NET_ALIAS is not set
    CONFIG_INET=y
    # CONFIG_IP_FORWARD is not set
    # CONFIG_IP_MULTICAST is not set
    CONFIG_IP_ACCT=y

    #
    # (it is safe to leave these untouched)
    #
    # CONFIG_INET_PCTCP is not set
    CONFIG_INET_RARP=m
    # CONFIG_NO_PATH_MTU_DISCOVERY is not set
    # CONFIG_IP_NOSR is not set
    CONFIG_SKB_LARGE=y

    #
    #
    #
    CONFIG_IPX=m
    CONFIG_IPX_INTERN=y
    CONFIG_ATALK=m
    # CONFIG_AX25 is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_NETLINK is not set

    #
    # SCSI support
    #
    CONFIG_SCSI=m

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=m
    CONFIG_CHR_DEV_ST=m
    CONFIG_BLK_DEV_SR=m
    CONFIG_CHR_DEV_SG=m

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AHA1740 is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_SCSI_AM53C974 is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_DMA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_NCR53C7xx is not set
    CONFIG_SCSI_NCR53C8XX=m
    # CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE is not set
    # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
    # CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT is not set
    # CONFIG_SCSI_NCR53C8XX_FORCE_ASYNCHRONOUS is not set
    # CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO is not set
    # CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK is not set
    # CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_SEAGATE is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    CONFIG_EQUALIZER=m
    # CONFIG_DLCI is not set
    CONFIG_PLIP=m
    CONFIG_PPP=m

    #
    # CCP compressors for PPP are only built as modules.
    #
    CONFIG_SLIP=m
    CONFIG_SLIP_COMPRESSED=y
    CONFIG_SLIP_SMART=y
    # CONFIG_SLIP_MODE_SLIP6 is not set
    # CONFIG_NET_RADIO is not set
    CONFIG_NET_ETHERNET=y
    CONFIG_NET_VENDOR_3COM=y
    # CONFIG_EL1 is not set
    CONFIG_EL2=m
    # CONFIG_ELPLUS is not set
    # CONFIG_EL16 is not set
    # CONFIG_EL3 is not set
    # CONFIG_VORTEX is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    CONFIG_NET_ISA=y
    # CONFIG_AT1700 is not set
    # CONFIG_E2100 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_EWRK3 is not set
    # CONFIG_EEXPRESS is not set
    # CONFIG_EEXPRESS_PRO is not set
    # CONFIG_FMV18X is not set
    # CONFIG_HPLAN_PLUS is not set
    # CONFIG_HPLAN is not set
    # CONFIG_HP100 is not set
    # CONFIG_ETH16I is not set
    CONFIG_NE2000=m
    # CONFIG_NI52 is not set
    # CONFIG_NI65 is not set
    # CONFIG_SEEQ8005 is not set
    # CONFIG_SK_G16 is not set
    # CONFIG_NET_EISA is not set
    # CONFIG_NET_POCKET is not set
    # CONFIG_TR is not set
    # CONFIG_ARCNET is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
    #
    CONFIG_CD_NO_IDESCSI=y
    # CONFIG_AZTCD is not set
    # CONFIG_GSCD is not set
    # CONFIG_SBPCD is not set
    CONFIG_MCD=m
    CONFIG_MCDX=m
    # CONFIG_OPTCD is not set
    # CONFIG_CM206 is not set
    # CONFIG_SJCD is not set
    # CONFIG_CDI_INIT is not set
    # CONFIG_CDU31A is not set
    # CONFIG_CDU535 is not set

    #
    # Filesystems
    #
    # CONFIG_QUOTA is not set
    # CONFIG_LOCK_MANDATORY is not set
    CONFIG_MINIX_FS=m
    # CONFIG_EXT_FS is not set
    CONFIG_EXT2_FS=y
    # CONFIG_XIA_FS is not set
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_UMSDOS_FS=m
    CONFIG_PROC_FS=y
    CONFIG_NFS_FS=m
    CONFIG_SMB_FS=m
    CONFIG_SMB_LONG=y
    CONFIG_NCP_FS=m
    CONFIG_ISO9660_FS=m
    CONFIG_HPFS_FS=m
    # CONFIG_SYSV_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Character devices
    #
    CONFIG_SERIAL=m
    # CONFIG_DIGI is not set
    # CONFIG_CYCLADES is not set
    # CONFIG_STALDRV is not set
    # CONFIG_RISCOM8 is not set
    CONFIG_PRINTER=m
    # CONFIG_MOUSE is not set
    # CONFIG_UMISC is not set
    # CONFIG_QIC02_TAPE is not set
    # CONFIG_FTAPE is not set
    # CONFIG_APM is not set
    # CONFIG_WATCHDOG is not set
    # CONFIG_RTC is not set

    #
    # Sound
    #
    CONFIG_SOUND=m
    # CONFIG_PAS is not set
    CONFIG_SB=y
    # CONFIG_ADLIB is not set
    # CONFIG_GUS is not set
    # CONFIG_MPU401 is not set
    # CONFIG_UART6850 is not set
    # CONFIG_PSS is not set
    # CONFIG_GUS16 is not set
    # CONFIG_GUSMAX is not set
    # CONFIG_MSS is not set
    # CONFIG_SSCAPE is not set
    # CONFIG_TRIX is not set
    # CONFIG_MAD16 is not set
    # CONFIG_CS4232 is not set
    # CONFIG_MAUI is not set
    CONFIG_AUDIO=y
    CONFIG_MIDI=y
    CONFIG_YM3812=y
    SBC_BASE=220
    SBC_IRQ=10
    SBC_DMA=1
    SB_DMA2=5
    SB_MPU_BASE=330
    SB_MPU_IRQ=-1
    DSP_BUFFSIZE=65536
    # CONFIG_LOWLEVEL_SOUND is not set

    #
    # Kernel hacking
    #
    # CONFIG_PROFILE is not set

    \
     
     \ /
      Last update: 2005-03-22 13:37    [W:0.036 / U:33.360 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site