lkml.org 
[lkml]   [1996]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.0.10 & 2.0.11 problems
Date
Hi,

I've installed 2.0.11 some days ago on my DX4 and since that I've severe
filesystem troubles. I get syslog messages like:

EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 128

The filesystem was damaged severely, fsck(1) couldn't repair it
automatically.


On my 2.0.10 (DX2) machine I've similar problems, I get syslog
messages like

EXT2-fs error (device 02:00): ext2_readdir: directory #2 contains a hole at offset 0


My DX4 machine has a DTC IDE cache controller installed which seems to
be a bit incompatible (for example, CD-ROMS don't work with it). But I've
never had troubles, it works fine.

My DX2 machine is a HP Vectra with onboard IDE.


...if you need more info, tell me, I'm trying to repair my filesystem
now :(



That's some syslog output from my DX4:

Aug 7 11:21:05 blechnockerl kernel: Console: 16 point font, 400 scans
Aug 7 11:21:05 blechnockerl kernel: Console: colour VGA+ 80x25, 1 virtual console (max 63)
Aug 7 11:21:05 blechnockerl kernel: Calibrating delay loop.. ok - 49.66 BogoMIPS
Aug 7 11:21:05 blechnockerl kernel: Memory: 19056k/20480k available (544k kernel code, 384k reserved, 496k data)
Aug 7 11:21:05 blechnockerl kernel: This processor honours the WP bit even when in supervisor mode. Good.
Aug 7 11:21:05 blechnockerl kernel: Swansea University Computer Society TCP/IP for NET3.034
Aug 7 11:21:05 blechnockerl kernel: IP Protocols: IGMP, ICMP, UDP, TCP
Aug 7 11:21:05 blechnockerl kernel: Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Aug 7 11:21:05 blechnockerl kernel: Checking 'hlt' instruction... Ok.
Aug 7 11:21:05 blechnockerl kernel: Linux version 2.0.10 (root@blechnockerl) (gcc version 2.7.2) #3- Mon Jul 29 10:14:41 MET DST 1996
Aug 7 11:21:05 blechnockerl kernel: Real Time Clock Driver v1.07
Aug 7 11:21:05 blechnockerl kernel: hda: non-IDE drive, CHS=1416/16/63
Aug 7 11:21:05 blechnockerl kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 7 11:21:05 blechnockerl kernel: ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Aug 7 11:21:05 blechnockerl kernel: NE*000 ethercard probe at 0x300: 00 00 e8 07 b9 82
Aug 7 11:21:05 blechnockerl kernel: eth0: NE2000 found at 0x300, using IRQ 5.
Aug 7 11:21:05 blechnockerl kernel: Partition check:
Aug 7 11:21:05 blechnockerl kernel: hda:Started kswapd v 1.4.2.2
Aug 7 11:21:05 blechnockerl kernel: hda1 hda2 hda3
Aug 7 11:21:05 blechnockerl kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 7 11:21:05 blechnockerl kernel: Adding Swap: 33260k swap-space
Aug 7 11:21:05 blechnockerl kernel: Unable to identify CD-ROM format.
Aug 7 11:21:05 blechnockerl kernel: EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 128
Aug 7 11:21:05 blechnockerl last message repeated 29 times
Aug 7 11:21:05 blechnockerl kernel: EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 130
Aug 7 11:21:05 blechnockerl last message repeated 11 times
Aug 7 11:21:28 blechnockerl kernel: EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 12
Aug 7 11:21:32 blechnockerl kernel: EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 130
Aug 7 11:21:34 blechnockerl last message repeated 5 times
Aug 7 11:21:35 blechnockerl kernel: EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 128
Aug 7 11:21:35 blechnockerl kernel: EXT2-fs warning (device 03:01): ext2_free_inode: bit already cleared for inode 130



#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y

#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
# CONFIG_PCI is not set
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=m
CONFIG_KERNEL_ELF=y
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M686 is not set

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_IDE_CHIPSETS is not set

#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
# CONFIG_FIREWALL is not set
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=m

#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y

#
#
#
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_DLCI is not set
CONFIG_PLIP=m
CONFIG_PPP=m

#
# CCP compressors for PPP are only built as modules.
#
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=y
# CONFIG_VORTEX is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_ISA=y
# CONFIG_AT1700 is not set
# CONFIG_E2100 is not set
# CONFIG_DEPCA is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_FMV18X is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_HP100 is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
CONFIG_NI52=m
# CONFIG_NI65 is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_SK_G16 is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_ARCNET is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Filesystems
#
CONFIG_QUOTA=y
# CONFIG_LOCK_MANDATORY is not set
CONFIG_MINIX_FS=m
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_LONG is not set
CONFIG_NCP_FS=m
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
# CONFIG_AFFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_SMD_DISKLABEL is not set

#
# Character devices
#
CONFIG_SERIAL=m
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=m
CONFIG_MOUSE=y
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_BUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
CONFIG_UMISC=y
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set


\
 
 \ /
  Last update: 2005-03-22 13:38    [W:0.023 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site