Messages in this thread |  | | Date | Fri, 23 Aug 1996 06:41:56 +0800 (WST) | From | Michael Slater <> | Subject | Re: XFree86 on linux laptop |
| |
Try it without 3 Button Emulation.
------------------------------------------ Michael Slater aonline@tnet.com.au http://www.tnet.com.au/~aonline ------------------------------------------
On Thu, 22 Aug 1996, Rajnish Sinha wrote:
> > I am trying to install X windows on linux. My linux version is > 1.2.13 with a patch for IP in IP tunnelling support. I have > installed XFree86 version 3.1.2 with files from the elf and common > distribution. > > I am using a NEC Versa 4050C laptop. > My laptop has Super VGA or SVGA video and I installed > the file X32SVGA.tgz from the XFree86 distribution. > I got the XF86config file for NEC Versa from the Linux laptops > home page. > I followed the instructions given in the INSTALL document to install > the X software. > > I was able to run X when I used linux kernel version 1.2.13. > But when I added the patch for IP in IP, > I get the following error message when I start X. > As you see in the error message, PS2 mouse support is recognized. > > Any suggestions on what I can do to make this work? > > Thanks > > > XFree86 Version 3.1.2 / X Window System > (protocol Version 11, revision 0, vendor release 6000) > Operating System: Linux > Configured drivers: > SVGA: server for 8-bit colour SVGA (Patchlevel 0): > et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00, > wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, vgawonder, > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420, > clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, > clgd5434, > clgd5436, clgd6205, clgd6215, clgd6225, clgd6235, ncr77c22, > ncr77c22e, > cpq_avga, oti067, oti077, oti087, mx, al2101, ali2228, ali2301, > ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, > ct65520, ct65530, ct65540, ct65545, ark1000vl, ark1000pv, > ark2000pv, > realtek, generic > (using VT number 7) > > XF86Config: /usr/X11R6/lib/X11/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200, > 3 button emulation (timeout: 50ms) > (**) SVGA: Graphics device ID: "Laptop" > (**) SVGA: Monitor ID: "C&T Laptop" > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/" > (**) SVGA: chipset: ct65545 > (**) SVGA: videoram: 1024k > (--) SVGA: clocks: 28.38 28.32 28.33 28.32 28.37 28.32 28.32 > 28.39 > (--) SVGA: Maximum allowed dot-clock: 65.000 MHz > (--) SVGA: There is no defined dot-clock matching mode "1024x768" > (--) SVGA: Removing mode "1024x768" from list of valid modes. > (--) SVGA: There is no mode definition named "800+600" > (--) SVGA: Removing mode "800+600" from list of valid modes. > (**) SVGA: Mode "800x600": mode clock = 28.300, clock used = 28.320 > (--) SVGA: There is no mode definition named "704x600" > (--) SVGA: Removing mode "704x600" from list of valid modes. > (**) SVGA: Mode "640x480": mode clock = 28.300, clock used = 28.320 > (--) SVGA: Virtual resolution set to 800x600 > (--) SVGA: SpeedUp code selection modified because virtualX != 1024 > > Fatal server error: > Cannot open mouse (Device or resource busy) > > xinit: No such file or directory (errno 2): unexpected signal 13 >
|  |