lkml.org 
[lkml]   [1996]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 1.99.14 & duplicate NE2000
Hi!

Your soundcard maybe the cause for your dead keyb. Have you tried
to modularize your sound driver and load it after loggin in?

Secondy I think it's not best to use two different IRQ's for DOS and
Linux. Eg. my Logitech Soundman 16(Pro Audo Spectrum 16 compatible)
needs special handling(Machine power off, hard reset or special
do_reset_when_reboot-Register set) when I try to change settings.

Have you tried to use same settings in Linux as in DOS(IRQ=7)?

On Sat, 8 Jun 1996, Herbert Rosmanith wrote:
> kernel = monolithic, nearly every software compiled in. however, from a
> previous compile, there are still /lib/modules/1.99.14/* left over
>
> at booting, a NE2000 (the only network-card in the system!) is reported as:
>
> > ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
> > NE*000 ethercard probe at 0x340: 00 00 e8 c6 d1 1f
> > eth0: NE2000 found at 0x340, using IRQ 15.
>
> now I go on, and type
>
> insmod /lib/modules/1.99.14./net/8390.o
> insmod /lib/modules/1.99.14./net/ne.o io=0x340
>
> > eth1: NE2000 found at 0x340, using IRQ 7.
> ^^^^^^

+-----------------------------------------------------------------------+
| Bernhard Kaindl, Tallak 95, 8103 Rein, Austria |
| Autor of kmenu, first kernel config tool for linux w/ automatic menus |
+-----------------------------------------------------------------------+




\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.064 / U:2.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site