lkml.org 
[lkml]   [1996]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectLast 1.99.13 hungs

I've just installed 1.99.13 to make "the final test", and it cannot setup
serial ports properly:

Situation:
-Serial module + kerneld
-UART 16550A ttyS0 and ttyS1
-modules 1.3.69k

Messages:

If I setup serial ports in rc.serial:

/var/log/messages:

Jun 6 18:22:56 macia kernel: Serial driver version 4.13 with no serial
options enabled
Jun 6 18:22:56 macia kernel: tty00 at 0x03f8 (irq = 4) is a 16550A
Jun 6 18:22:56 macia kernel: tty01 at 0x02f8 (irq = 3) is a 16550A
Jun 6 18:22:56 macia kernel: tty12 at 0x0330 (irq = 4)
Jun 6 18:22:56 macia kernel: tty13 at 0x0338 (irq = 4)
Jun 6 18:22:56 macia kernel: tty14 at 0x0000 (irq = 0)
Jun 6 18:22:56 macia kernel: tty15 at 0x0000 (irq = 0) is a 16550A

And the system locks solid. You cannot do anything.


And if I start it by hand I get the same message and also:


Jun 6 19:07:13 macia kernel: tty16 at 0x0100 (irq = 12)
Jun 6 19:07:13 macia kernel: tty18 at 0x0110 (irq = 21249) is a 16550A
Jun 6 19:07:13 macia kernel: tty23 at 0x0138 (irq = 12)
Jun 6 19:07:13 macia kernel: tty26 at 0x03f8 (irq = 12)
Jun 6 19:07:13 macia kernel: tty27 at 0x0004 (irq = 12)

And it doesn't lock.


This doesn't happen with 1.99.12. It runs fine.
Hope this helps. I can't get more info from my logs, but if I can help
just let me know.

Greetings.

Waiting anxiously for 2.0.


Pau Aliagas ////
Equip Webmaster (@ @) Ready Soft
------------------------oOO--(_)--OOo------------------------
Et portem el mon a casa



\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.032 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site