[lkml]   [1996]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Problem with sound driver in 2.0.0
Steve VanDevender wrote:
> On the other hand, the sound driver works (or fails to work) just as it
> did before in DOOM, and after some random amount of time (usually 5-15
> minutes of play) the sound stops and I get the "DMA (output) timed out -
> IRQ/DRQ conflict?" messsage although no such conflict exists on my
> system. I should also note that this happened when I had all IDE disks,
> and so far I haven't seen any noticeable difference in this behavior as
> a result of using SCSI instead of IDE.

I see the same thing on my system with both doom and the Quake test. I have a
PCI P133 with NCR scsi controller. My system doesn't have any conflicts.
This is my /dev/sndstat:

Installed drivers:
Type 1: OPL-2/OPL-3 FM
Type 2: SoundBlaster
Type 6: SoundBlaster 16bit
Type 7: SB MPU

Card config:
SoundBlaster at 0x220 irq 7 drq 1,5
(SB MPU at 0x0 irq 1 drq 0)
OPL-2/OPL-3 FM at 0x388 irq 0 drq 0

Audio devices:
0: ESS ES1688 AudioDrive (rev 5)

Synth devices:
0: Yamaha OPL-3

Midi devices:

0: System clock

0: SoundBlaster

 \ /
  Last update: 2005-03-22 13:37    [W:0.045 / U:6.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site