Messages in this thread |  | | Date | Sun, 23 Jun 1996 13:21:44 +0200 (MESZ) | From | Alexander Ehlert <> | Subject | Re: Linux 2.0.0 NCR scsi instability |
| |
Hi,
> > I get all sorts of interesting error messages, like scsi commands > > timing out, resetting scsi bus, and so on when I run the Linux 2.0.0 > > kernel on my ASUS P/I-P55TP4XE Pentium motherboard with an NCR53c810 > > SCSI controller on an SC-200 plug-in PCI card. These messages are > > followed by some disk corruption. Under 1.99.7, I do not have these > > problems. I will try to narrow the problem down to a specific kernel > > version number shortly. > > did you allow DISCONNECTs (CONFIG_SCSI_NCR53C7xx_DISCONNECT set) ? > this is known to show problems on several plattforms. > try if you can reproduce the problems with CONFIG_SCSI_NCR53C7xx_DISCONNECT disabled.
I've got the same mainboard with a gigabyte NCR53c810 controller, running 2 harddisks, all options enabled(disconnect/reconnect,syncronous transfer,...) and had no problems yet...
Bye, Alex
****************************************************************************** * flames to /dev/null/, mail to alexander.ehlert@student.uni-tuebingen.de * * have fun at http://www.jura.uni-tuebingen.de/~s-eha1/ * ******************************************************************************
|  |