Messages in this thread |  | | From | Samuel Koods <> | Subject | Re: Problems in 2.0.0 | Date | Fri, 14 Jun 1996 11:36:13 -0500 (CDT) |
| |
S. G. Sanjay wrote: >
[...]
> 1) ping/telnet to LOCAL HOST ( 144.16.64.10 ) says : > > Trying 144.16.64.10... > telnet: Unable to connect to remote host: Network is unreachable > > talk also fails saying : > > [Error on write to talk daemon : Network is unreachable (101)] >
Are you using the right gateway/router address?
> > 2) We are trying to set up MBONE on our campus. I got mrouted ver-3.8 > and tried to run it but I get the following error message : > [...] > 16:07:06.684 can't enable Multicast routing in kernel: Protocol not available > [...] > mpeg:sanjay > ifconfig eth0 > > eth0 Link encap:10Mbps Ethernet HWaddr 00:80:C8:14:41:CD > inet addr:144.16.64.10 Bcast:144.16.64.255 Mask:255.255.224.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:137914 errors:0 dropped:0 overruns:0 > TX packets:9547 errors:0 dropped:0 overruns:0 > Interrupt:5 Base address:0x300 >
IP gatewaying/forwarding has to be compiled in for Multicasting to work (according to the help section for IP gatewaying/forwarding in menuconfig).
-- Samuel Koods Cimarron Network Services
|  |