lkml.org 
[lkml]   [1996]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Nx586 - NexGen work fine with Linux???
>Does anybody have a Linux installed at NexGen Nx586 machines??
>
>I'm receiving a couple off errors from eth0...
>
>--------8< * Cut Here -------------------
>
>eth0 mismatch read page points 4c vs 4d
>
>--------8< * Cut Here -------------------
>
Yes I do, and had the same problem with an NE2000 card until on
1.3.15 but the 8390 driver with 1.3.97 seems to have fixed this, but
strangely enough the 3C509 driver I was using seems to have broke in this
version, also if I try a ps -u I get a "Floating point exeption" that i've
never seen before.

Other strange happennings are that I can only compile as a 386
machine as the kernel seems to think I have a 386 (perhaps theres a kludge
for my bios) and if I modify bugs.h to allow a 486 or 586 compiled kernel
run on my 586 it crashes as soon as the "AHA1540-2" and associated nits
have finished I get an unknown opcode 0000.

--Have a Nice Day, Ian




\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.070 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site