[lkml]   [1996]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectOops in 1.3.100

Just tried out 1.3.100 and got an oops. The last two messages I got
at boot were:

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Started kswapd v

Then I got:

Kernel NULL pointer dereference at virtual address c00000d6
current->tss.cr3=00101000 %cr3=00101000
cpu 0
eip 0010:[<00161bc1>] save_match (in ide.c)
eflags 00010046

Swapper pid:1 process nr: 1 stackpage: 001fc000

... and so on ...

I also have a second ide interface that normally shows up as:
ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0)

The controller is a dtc2278e. I boot with the ide0=dtc2278 parameter.

The stack trace is as follows:
00161cae: init_irq
0015fa20: do_ide1_request
00161fa6: hwif_init
0016206a: ide_init
0015d420: blk_dev_init
... and so on.

I have used 1.3.96 since it was released without trouble. Something
went bad since then... I will try to figure this one out, but I have
a feeling the experts can do it faster...

Need any more info???? Just ask.


 \ /
  Last update: 2005-03-22 13:37    [W:0.018 / U:2.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site