lkml.org 
[lkml]   [1996]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject1.3.97 make warnings
Date
Okay, it's getting near "stable" release time, so here's a warnings list.

I've also included my .config, in case anyone wants to reproduce this lot :-).

(Just to stop the flames, this time... I build _everything_ because
a linux kernel SHOULD work that way. I've modules for everything that
offers it, built in everything that doesn't. (I still don't touch
watchdog, coz it's scary :-)).)

-- Peter
--
drealm Conference System - (+44) 181 568 2204 (V.34)
The home of drealmBBS ---- five lines -- linux files
pty.c: In function `pty_open':
pty.c:184: warning: unused variable `wait'
atp.c: In function `set_multicast_list':
atp.c:765: warning: initialization makes integer from pointer without a cast
pi2.c: In function `pi_probe':
pi2.c:1427: warning: assignment from incompatible pointer type
pt.c: In function `pt_probe':
pt.c:894: warning: assignment from incompatible pointer type
pt.c: In function `pt_rxisr':
pt.c:1273: warning: `cur_buf' might be used uninitialized in this function
pt.c: At top level:
pt.c:1433: warning: `empty_scc' defined but not used
pt.c:324: warning: `pt_loopback' defined but not used
hosts.c:284: warning: initialization from incompatible pointer type
dev.c: In function `net_dev_init':
dev.c:1385: warning: implicit declaration of function `pt_init'
ip_masq.c: In function `ip_fw_demasquerade':
ip_masq.c:642: warning: unused variable `timeout'
br.c: In function `br_forward':
br.c:1263: warning: unused variable `flags'
br.c: In function `br_flood':
br.c:1347: warning: unused variable `flags'
br.c: In function `br_ioctl':
br.c:1425: warning: unused variable `i'
br_tree.c:27: warning: `printk_avl' declared `static' but never defined
time.c:37: warning: `do_fast_gettimeoffset' defined but not used
time.c:280: warning: `pentium_timer_interrupt' defined but not used
3c501.c:78: warning: `version' defined but not used
3c501.c:357: warning: `el_open' defined but not used
3c501.c:377: warning: `el_start_xmit' defined but not used
3c501.c:755: warning: `el1_close' defined but not used
3c501.c:777: warning: `el1_get_stats' defined but not used
3c501.c:788: warning: `set_multicast_list' defined but not used
eexpress.c:1208: warning: missing braces around initializer for `dev_eexp[0]'
apricot.c: In function `init_i596_mem':
apricot.c:301: warning: left-hand operand of comma expression has no effect
apricot.c:313: warning: left-hand operand of comma expression has no effect
apricot.c: In function `i596_cleanup_cmd':
apricot.c:419: warning: unused variable `count'
apricot.c:430: warning: left-hand operand of comma expression has no effect
apricot.c: In function `i596_reset':
apricot.c:448: warning: left-hand operand of comma expression has no effect
apricot.c:465: warning: left-hand operand of comma expression has no effect
apricot.c: In function `i596_add_cmd':
apricot.c:502: warning: left-hand operand of comma expression has no effect
apricot.c: In function `i596_interrupt':
apricot.c:770: warning: left-hand operand of comma expression has no effect
apricot.c:829: warning: unused variable `count'
apricot.c:892: warning: left-hand operand of comma expression has no effect
apricot.c: In function `i596_close':
apricot.c:930: warning: left-hand operand of comma expression has no effect
eth16i.c:184: warning: `BS1' redefined
/usr/src/linux/include/asm/termbits.h:80: warning: this is the location of the previous definition
eth16i.c:185: warning: `BS0' redefined
/usr/src/linux/include/asm/termbits.h:79: warning: this is the location of the previous definition
eth16i.c: In function `eth16i_probe1':
eth16i.c:456: warning: assignment from incompatible pointer type
advansys.c:3533: warning: initialization from incompatible pointer type
ppa.c:498: warning: initialization from incompatible pointer type
qlogic.c:675: warning: initialization from incompatible pointer type
aha152x.c:2972: warning: initialization from incompatible pointer type
aha1740.c:521: warning: initialization from incompatible pointer type
aic7xxx.c:4681: warning: initialization from incompatible pointer type
eata_dma.c:1351: warning: initialization from incompatible pointer type
eata_pio.c:1026: warning: initialization from incompatible pointer type
fdomain.c:2075: warning: initialization from incompatible pointer type
53c7,8xx.c:6399: warning: initialization from incompatible pointer type
53c7,8xx.c:713: warning: `request_synchronous' defined but not used
53c7,8xx.c:761: warning: `request_disconnect' defined but not used
53c7,8xx.c:5415: warning: `ncr_state' defined but not used
seagate.c:1752: warning: initialization from incompatible pointer type
wd7000.c:1234: warning: initialization from incompatible pointer type
ultrastor.c:1157: warning: initialization from incompatible pointer type
NCR53c406a.c:1057: warning: initialization from incompatible pointer type
#
# Automatically generated make config: don't edit
#

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KERNELD=y

#
# General setup
#
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M686 is not set

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_IDE=y

#
# Please see drivers/block/README.ide for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDE_PCMCIA=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
CONFIG_IDE_CHIPSETS=y

#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_DTC2278=y
CONFIG_BLK_DEV_HT6560B=y
CONFIG_BLK_DEV_QD6580=y
CONFIG_BLK_DEV_UMC8672=y
CONFIG_BLK_DEV_ALI14XX=y
CONFIG_BLK_DEV_PROMISE=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_XD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m

#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_IP_FIREWALL_VERBOSE=y
CONFIG_IP_MASQUERADE=y
CONFIG_IP_MROUTE=y
CONFIG_IP_ALIAS=m

#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
# CONFIG_TCP_NAGLE_OFF is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y

#
#
#
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_AX25=y
CONFIG_BPQETHER=y
CONFIG_NETROM=y
CONFIG_BRIDGE=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CDrom)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y

#
# SCSI low-level drivers
#
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_NCR53C7xx=m
CONFIG_SCSI_NCR53C7xx_sync=y
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_AM53C974=y

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_PPP=m

#
# CCP compressors for PPP are only built as modules.
#
CONFIG_STRIP=m
CONFIG_WIC=m
CONFIG_SCC=m
CONFIG_PLIP=m
CONFIG_EQUALIZER=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_NET_ALPHA=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_LANCE=y
CONFIG_LANCE32=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_VORTEX=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_DEPCA=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_SEEQ8005=y
CONFIG_AT1700=m
CONFIG_FMV18X=m
CONFIG_EEXPRESS_PRO=m
CONFIG_NI52=m
CONFIG_NI65=y
CONFIG_WAVELAN=m
CONFIG_ETH16I=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_HP100=m
CONFIG_NE2000=m
CONFIG_PI=y
CONFIG_PT=y
CONFIG_SK_G16=y
CONFIG_NET_EISA=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_DE4X5=m
CONFIG_DEC_ELCP=m
CONFIG_DGRS=m
CONFIG_ZNET=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_ARCNET=m
CONFIG_ARCNET_ETH=y
CONFIG_ARCNET_1051=y

#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_DRV_TELES=m
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_CDU31A=m
CONFIG_MCD=m
CONFIG_MCDX=m
CONFIG_SBPCD=m
CONFIG_AZTCD=m
CONFIG_CDU535=m
CONFIG_GSCD=m
CONFIG_CM206=m
CONFIG_OPTCD=m
CONFIG_SJCD=m
CONFIG_CDI_INIT=y
CONFIG_ISP16_CDI=m

#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_MINIX_FS=m
CONFIG_EXT_FS=m
CONFIG_EXT2_FS=y
CONFIG_XIA_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_PROC_FS=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_NCP_FS=m
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_AFFS_FS=y
CONFIG_UFS_FS=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SMD_DISKLABEL=y

#
# Character devices
#
CONFIG_SERIAL=m
CONFIG_DIGI=y
CONFIG_CYCLADES=m
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_RISCOM8=m
CONFIG_PRINTER=m
CONFIG_BUSMOUSE=m
CONFIG_PSMOUSE=m
CONFIG_82C710_MOUSE=y
CONFIG_MS_BUSMOUSE=m
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_UMISC=y
CONFIG_QIC02_TAPE=y
CONFIG_QIC02_DYNCONF=y

#
# Setting runtime QIC-02 configuration is done with qic02conf
#

#
# from the tpqic02-support package. It is available at
#

#
# ftp://titus.cfw.com/pub/Linux/util/
#
CONFIG_FTAPE=m

#
# Set IObase/IRQ/DMA for ftape in ./drivers/char/ftape/Makefile
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y

#
# Sound
#
CONFIG_SOUND=m
# CONFIG_PAS is not set
CONFIG_SB=y
CONFIG_ADLIB=y
# CONFIG_GUS is not set
# CONFIG_MPU401 is not set
# CONFIG_UART6850 is not set
# CONFIG_PSS is not set
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
# CONFIG_MSS is not set
# CONFIG_SSCAPE is not set
# CONFIG_TRIX is not set
# CONFIG_MAD16 is not set
# CONFIG_CS4232 is not set
# CONFIG_MAUI is not set
CONFIG_AUDIO=y
CONFIG_MIDI=y
CONFIG_YM3812=y
# CONFIG_SMWAVE is not set
SBC_BASE=220
SBC_IRQ=7
SBC_DMA=1
SB_DMA2=0
SB_MPU_BASE=0
SB_MPU_IRQ=-1
DSP_BUFFSIZE=65536

#
# Kernel hacking
#
# CONFIG_PROFILE is not set
\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.072 / U:1.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site