lkml.org 
[lkml]   [1996]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: networking, 1.3.91
All that you suggest checks out, I did notice another
additional oddity. when I do an ifconfig sometimes
it shows eth0 in promisc mode! So I ifconfig eth0 -promisc,
it goes back to the way it was and everything runs smoothly
for a couple more hours. When the network starts dragging
again later, I'll do ifconfig, and the promisc will be back
again!! Is my card dying?


---russ

On Wed, 24 Apr
1996,
Alan Cox wrote:

> > shemp, etc... seinfeld is a P60, WD card. 1.3.91. I get strange delays
> > in my windows on the other machines. My tcpdump says this:
> >
> > seinfeld:~$ tail /var/log/syslog
> > Apr 23 09:37:41 seinfeld kernel: eth0: bogus packet size: 7354,
> > status=0x1 nxpg=0xc.
> > Apr 23 09:37:59 seinfeld kernel: eth0: bogus packet size: 8224
> > status=0x20 nxpg=0x20.
> > Apr 23 09:37:59 seinfeld kernel: eth0: next frame inconsistency, 0x20
> > Apr 23 09:38:07 seinfeld kernel: eth0: bogus packet size: 7610,
> >
> > Any clues as to what's going on here?
>
> Make sure your ISA bus is at 8MHz, you dont have the memory area shadowed
> or cached by the BIOS and there is not a mix of 8bit and 16bit cards within
> that 128K block of ISA bus memory space. If its ok then we need to look
> further.
>
> Alan
>
>
>



\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.093 / U:5.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site