Messages in this thread | | | From | (TANAKA Yoshitomo) | Subject | 1.3.89 BusLogic driver problem | Date | 16 Apr 1996 00:07:34 +0900 |
| |
I just update 1.3.88 to 1.3.89 and BusLogic driver fails to initializing. Boot up console shows following.
>scsi: ***** BusLogic SCSI Driver Version 1.3.2 of 13 April 1996 ***** >scsi: Copyright 1995 by Leonard N. Zubkoff <lnz@dandelion.com> >scsi0: Configuring BusLogic Model BT-44xC VESA SCSI Host Adapter >scsi0: Firmware Version: 4.21, I/O Address: 0x330, IRQ Channel: 11/Edge >scsi0: DMA Channel: None, BIOS Address: 0xDC000, Host Adapter SCSI ID: 7 >scsi0: Scatter/Gather Limit: 128 of 8192 segments, Parity Checking: Enabled >scsi0: Synchronous Initiation: Enabled, Extended Disk Translation: Disabled >scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Disabled >scsi0: Total Queue Depth: 100, Mailboxes: 255, Initial CCBs: 64 >scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 >scsi0: Host Adapter SCSI Bus Termination: Disabled >scsi0: Error Recovery Strategy: Default >scsi0: *** BusLogic BT-44xC Initialized Successfully *** >While configuring BusLogic Host Adapter at I/O Address 0x330: >INQUIRE DEVICES FAILED - DETACHING >ADDITIONAL FAILURE INFO - Command Invalid >scsi : 0 hosts. >scsi : detected total. >Partition check: >VFS: Cannot open root device 08:01 >Kernel panic: VFS: Unable to mount root fs on 08:01
And I have following SCSI devices (cat /proc/scsi/scsi on 1.3.88).
>Attached devices: >Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: IBM Model: DPES-31080 Rev: S31K > Type: Direct-Access ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: IBM Model: DPES-31080 Rev: S31Q > Type: Direct-Access ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 03 Lun: 00 > Vendor: SEAGATE Model: ST31230N Rev: 0510 > Type: Direct-Access ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 04 Lun: 00 > Vendor: TOSHIBA Model: CD-ROM XM-3401TA Rev: 0283 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 05 Lun: 00 > Vendor: QUANTUM Model: EMPIRE_1080S Rev: 1220 > Type: Direct-Access ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 00 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 01 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 02 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 03 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 04 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 05 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02 >Host: scsi0 Channel: 00 Id: 06 Lun: 06 > Vendor: NRC Model: MBR-7 Rev: 110 > Type: CD-ROM ANSI SCSI revision: 02
----_--__---_-_-_-__--_-__-__---_-_----_--_-_---_---_---- _/ TANAKA Yoshitomo _// / Suginami-ku Tokyo, Japan _// serow@silkwood.rim.or.jp
| |