lkml.org 
[lkml]   [1996]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectLots of 'Tx timed out' in 1.3.75
Date
From
Ever since 1.3.75 (didn't run 1.3.7[234]), I get strange Ethernet
messages, such as

Mar 18 13:20:45 myhost kernel: eth0: reset did not complete at ei_rx_overrun.

or

Mar 18 14:46:07 myhost kernel: eth0: Tx timed out, cable problem? TSR=0x40, ISR=0x0, t=100.
Mar 18 14:46:36 myhost kernel: eth0: Tx timed out, cable problem? TSR=0x0, ISR=0x0, t=2651.

(There always was one of these at bootup time, which I ignored, but there
are far more of them now).

This is for a PCI P90, 3c503 ethernet card.
--
Thomas Koenig, Thomas.Koenig@ciw.uni-karlsruhe.de, ig25@dkauni2.bitnet.
The joy of engineering is to find a straight line on a double
logarithmic diagram.


\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.180 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site