Messages in this thread |  | | Date | Sat, 9 Nov 1996 17:09:53 -0800 | From | "Leonard N. Zubkoff" <> | Subject | Re: Tape Problems Redux |
| |
From: bandregg@idir.net Date: Sat, 09 Nov 1996 09:53:32 -0600
Can anyone identify this problem as being the scsi adapter, the DAT drive or the tape itself?
Nov 9 09:49:27 cypress kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 3 Nov 9 09:49:27 cypress kernel: ASC= 3 ASCQ= 2 Nov 9 09:49:27 cypress kernel: Raw sense data:0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x03 0x02 0x00 0x2a Nov 9 09:49:27 cypress kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 3 Nov 9 09:49:27 cypress kernel: ASC= 3 ASCQ= 2 Nov 9 09:49:27 cypress kernel: Raw sense data:0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x03 0x02 0x00 0x2a Nov 9 09:49:27 cypress kernel: st0: Error on write filemark.
Thanks very much this is very important.
Bryan C. Andregg
The Sense Code is 3, MEDIUM ERROR:
| 3h | MEDIUM ERROR. Indicates that the command terminated with a non- | | | recovered error condition that was probably caused by a flaw in | | | the medium or an error in the recorded data. This sense key may | | | also be returned if the target is unable to distinguish between a | | | flaw in the medium and a specific hardware failure (sense key 4h).|
The Additional Sense Code (ASC) and Additional Sense Code Qualifier (ASCQ) indicate:
| 03h 02h T EXCESSIVE WRITE ERRORS |
All from the draft SCSI-2 spec.
I'd say it's either the tape itself or possibly the drive.
Leonard
|  |