Messages in this thread |  | | Date | Wed, 23 Oct 1996 20:35:46 GMT | From | root <> | Subject | Poblems with ISO9660/SCSI-CDROM and k2.1.5 |
| |
Hi!
I have a problem concerning linux-kernel 2.1.5.
Compiling: ok! Booting: ok! "Mounting" of modules: ok! (seems so...)
But if I try to mount my SCSI-CDROM, insmod(?) says: "This kernel does not support ISO9660". Seems to be not correct, because I have switched on kernel support for ISO9660 and SCSI-CDROM as modules.
Hmmm...retrying the hole thing and including the IS09660-fs/SCSI-CDROM support _into_ (no module) the kernel only changes the error message .. "Bad block..." (comes up after seconds of suspense in waiting of a reaction...)
Doies anybody knows anything about this feature? ;-)
My playground: processor : 0 cpu : 586 model : Pentium 75+ vendor_id : GenuineIntel stepping : 4 fdiv_bug : no hlt_bug : no fpu : yes fpu_exception : yes cpuid : yes wp : yes flags : fpu vme de pse tsc msr mce cx8 bogomips : 39.83
Plato Board
Bus 0, device 14, function 0: VGA compatible controller: S3 Inc. Trio32/Trio64 (rev 0). Medium devsel. IRQ 9. Non-prefetchable 32 bit memory at 0xf3000000. Bus 0, device 6, function 0: SCSI storage controller: NCR 53c815 (rev 3). Medium devsel. IRQ 9. Master Capable. Latency=66. Min Gnt=8.Max Lat=64. I/O at 0xfc00. Non-prefetchable 32 bit memory at 0xffbffc00. Bus 0, device 2, function 0: Non-VGA device: Intel 82378IB (rev 67). Medium devsel. Master Capable. No bursts. Bus 0, device 1, function 0: IDE interface: PCTECH RZ1000 (buggy) (rev 1). Fast devsel. I/O at 0x1f0. I/O at 0x3f4. Bus 0, device 0, function 0: Host bridge: Intel 82434LX Mercury/Neptune (rev 17). Slow devsel. Master Capable. Latency=64.
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-009f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : npu 02f8-02ff : serial(auto) 03c0-03df : vga+ 03f8-03ff : serial(auto) fc00-fc7f : ncr53c8xx
total: used: free: shared: buffers: cached: Mem: 31965184 27750400 4214784 5423104 9015296 10866688 Swap: 21999616 2416640 19582976 MemTotal: 31216 kB MemFree: 4116 kB MemShared: 5296 kB Buffers: 8804 kB Cached: 10612 kB SwapTotal: 21484 kB SwapFree: 19124 kB
#### The kernel configuration ###
# # Automatically generated make config: don't edit #
# # Code maturity level options # # CONFIG_EXPERIMENTAL is not set
# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KERNELD=y
# # General setup # # CONFIG_MATH_EMULATION is not set CONFIG_NET=y # CONFIG_MAX_16M is not set CONFIG_PCI=y CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y # CONFIG_M386 is not set # CONFIG_M486 is not set CONFIG_M586=y # CONFIG_M686 is not set
# # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_IDE is not set
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_ONLY is not set
# # Additional Block Devices # # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_RAM=m # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_HD is not set
# # Networking options # # CONFIG_FIREWALL is not set # CONFIG_NET_ALIAS is not set CONFIG_INET=y # CONFIG_IP_FORWARD is not set # CONFIG_IP_MULTICAST is not set CONFIG_IP_ACCT=y
# # (it is safe to leave these untouched) # # CONFIG_INET_PCTCP is not set # CONFIG_INET_RARP is not set # CONFIG_NO_PATH_MTU_DISCOVERY is not set # CONFIG_IP_NOSR is not set # CONFIG_SKB_LARGE is not set
# # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_AX25 is not set # CONFIG_NETLINK is not set
# # SCSI support # CONFIG_SCSI=y
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set CONFIG_BLK_DEV_SR=m # CONFIG_CHR_DEV_SG is not set
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set
# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set CONFIG_SCSI_NCR53C8XX=y # CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT is not set # CONFIG_SCSI_NCR53C8XX_FORCE_ASYNCHRONOUS is not set CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO=y # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set
# # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_EQUALIZER=m # CONFIG_PLIP is not set CONFIG_PPP=m
# # CCP compressors for PPP are only built as modules. # CONFIG_SLIP=y # CONFIG_SLIP_COMPRESSED is not set CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_RADIO is not set # CONFIG_NET_ETHERNET is not set # CONFIG_TR is not set # CONFIG_ARCNET is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set
# # Filesystems # # CONFIG_QUOTA is not set CONFIG_MINIX_FS=m # CONFIG_EXT_FS is not set CONFIG_EXT2_FS=y # CONFIG_XIA_FS is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_VFAT_FS is not set # CONFIG_UMSDOS_FS is not set CONFIG_PROC_FS=y # CONFIG_NFS_FS is not set # CONFIG_SMB_FS is not set CONFIG_ISO9660_FS=m # CONFIG_HPFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set
# # Character devices # CONFIG_SERIAL=m # CONFIG_DIGI is not set # CONFIG_CYCLADES is not set # CONFIG_STALDRV is not set # CONFIG_RISCOM8 is not set CONFIG_PRINTER=m # CONFIG_MOUSE is not set # CONFIG_UMISC is not set # CONFIG_QIC02_TAPE is not set # CONFIG_FTAPE is not set # CONFIG_APM is not set # CONFIG_WATCHDOG is not set CONFIG_RTC=y
# # Sound # # CONFIG_SOUND is not set
# # Kernel hacking # # CONFIG_PROFILE is not set
KEEP HACKING! mcc ...who dances with modems...
|  |