lkml.org 
[lkml]   [1996]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: cdu31a.c patch in 2.0.23 and 2.1.5
From
Date

Chris Buchanan <csbuchan@undergrad.math.uwaterloo.ca> writes:
>
> The patch for the cdu31a driver that was included in 2.0.23 and
> 2.1.5 broke my system; well, that's a bit of an over-statement.
> It broke the ability to play audio-cds. Basically, it looks like
> the drive is reporting the first and last track numbers in
> BCD form (which makes a certain amount of sense) and not in
> integer form (which is what the change assumes). I am a little
> curious if this change actually works for anybody. Reports are
> welcome.
>

Sorry for the problem. There was a bug and someone suggested a fix
that I did, but I couldn't test it because my interface card broke. I
didn't consider the fix very carfully and it was incorrect. I am
including a fix.

--
Corey Minyard Internet: minyard@metronet.com
Work: minyard@nortel.ca UUCP: minyard@wf-rch.cirr.com

--- linux/drivers/cdrom/cdu31a.c.old Sun Oct 20 22:25:06 1996
+++ linux/drivers/cdrom/cdu31a.c Sun Oct 20 22:30:31 1996
@@ -1915,7 +1915,9 @@
int num_tracks;


- num_tracks = sony_toc.last_track_num - sony_toc.first_track_num + 1;
+ num_tracks = ( bcd_to_int(sony_toc.last_track_num)
+ - bcd_to_int(sony_toc.first_track_num)
+ + 1);
for (i = 0; i < num_tracks; i++)
{
if (sony_toc.tracks[i].track == track)
@@ -2486,8 +2488,8 @@
i=verify_area(VERIFY_WRITE, hdr, sizeof(*hdr));
if(i<0)
return i;
- loc_hdr.cdth_trk0 = sony_toc.first_track_num;
- loc_hdr.cdth_trk1 = sony_toc.last_track_num;
+ loc_hdr.cdth_trk0 = bcd_to_int(sony_toc.first_track_num);
+ loc_hdr.cdth_trk1 = bcd_to_int(sony_toc.last_track_num);
memcpy_tofs(hdr, &loc_hdr, sizeof(*hdr));
}
return 0;
@@ -2567,8 +2569,8 @@
return i;

memcpy_fromfs(&ti, (char *) arg, sizeof(ti));
- if ( (ti.cdti_trk0 < sony_toc.first_track_num)
- || (ti.cdti_trk0 > sony_toc.last_track_num)
+ if ( (ti.cdti_trk0 < bcd_to_int(sony_toc.first_track_num))
+ || (ti.cdti_trk0 > bcd_to_int(sony_toc.last_track_num))
|| (ti.cdti_trk1 < ti.cdti_trk0))
{
return -EINVAL;
@@ -2587,7 +2589,7 @@
* If we want to stop after the last track, use the lead-out
* MSF to do that.
*/
- if (ti.cdti_trk1 >= sony_toc.last_track_num)
+ if (ti.cdti_trk1 >= bcd_to_int(sony_toc.last_track_num))
{
log_to_msf(msf_to_log(sony_toc.lead_out_start_msf)-1,
&(params[4]));
\
 
 \ /
  Last update: 2005-03-22 13:38    [W:0.069 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site