lkml.org 
[lkml]   [2002]   [Dec]   [7]   [last100]   RSS-feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Complete thread (EXPERIMENTAL)
Patches in this message
/
SubjectRe: Re[2]: [STATUS] fbdev api.
FromAntonino Daplas <>
Date07 Dec 2002 15:22:07 +0500
Digg This
On Sat, 2002-12-07 at 03:59, Tobias Rittweiler wrote: [...]
c) instruction: | produces:
======================|==================
1. typing abc def | $ abc def
| ^ (<- cursor)
2. going three chars | $ abc def
ro the left | ^
3. pressing backspace | $ abcddef
| ^
4. pressing enter | -bash: abcdef: command not found |

AD> I get this also. Seems to occur only with colored terms. When I do
AD> set TERM=vt100

AD> the problem disappears, so I thought this was an isolated case with my AD> setup :-). Similar glitches happen also in emacs with syntax AD> highlighting turned on.

Still there.

Can you try this? It should fix the problem you mentioned as well as the emacs glitch. Also, a quick fix for character map generation failures (KDFONTOP ioctl), ie when selecting console fonts. Finally, if fbdev supports blanking, let's use that.


[view this diff only]
diff -Naur linux-2.5.50-js/drivers/video/console/fbcon.c linux/drivers/video/console/fbcon.c
--- linux-2.5.50-js/drivers/video/console/fbcon.c	2002-12-07 10:10:40.000000000 +0000
+++ linux/drivers/video/console/fbcon.c	2002-12-07 10:12:11.000000000 +0000
@@ -357,7 +357,7 @@
 	area.dx = dx * vc->vc_font.width;
 	area.dy = dy * vc->vc_font.height;
 	area.height = height * vc->vc_font.height;
-	area.width = width * vc->vc_font.height;
+	area.width = width * vc->vc_font.width;
 
 	info->fbops->fb_copyarea(info, &area);
 }
@@ -910,6 +910,12 @@
 
 	info->var.xoffset = info->var.yoffset = p->yscroll = 0;	/* reset wrap/pan */
 
+	/*
+	 * FIXME: need to set this in order for KDFONTOP ioctl
+	 *        to work 
+	 */
+	p->fontwidthmask = FONTWIDTHRANGE(1,16);
+
 	for (i = 0; i < MAX_NR_CONSOLES; i++)
 		if (i != con && fb_display[i].fb_info == info &&
 		    fb_display[i].conp && fb_display[i].fontdata)
@@ -1987,12 +1993,9 @@
 		else
 			update_screen(vc->vc_num);
 		return 0;
-	} else {
-		/* Tell console.c that it has to restore the screen itself */
-		return 1;
-	}
-	fb_blank(blank, info);
-	return 0;
+	} 
+	else 
+		return info->fbops->fb_blank(blank, info);
 }
 
 static void fbcon_free_font(struct display *p)
Tony

PS: James, can you also apply the following riva cleanup patch. It fixes compile failures as well as removal of unused defines and declarations.

Thanks.




[view this diff only]
diff -Naur linux-2.5.50-js/drivers/video/riva/fbdev.c linux/drivers/video/riva/fbdev.c
--- linux-2.5.50-js/drivers/video/riva/fbdev.c	2002-12-07 09:50:22.000000000 +0000
+++ linux/drivers/video/riva/fbdev.c	2002-12-07 09:53:45.000000000 +0000
@@ -214,31 +214,6 @@
 };
 MODULE_DEVICE_TABLE(pci, rivafb_pci_tbl);
 
-
-
-/* ------------------------------------------------------------------------- *
- *
- * framebuffer related structures
- *
- * ------------------------------------------------------------------------- */
-
-extern struct display_switch fbcon_riva8;
-extern struct display_switch fbcon_riva16;
-extern struct display_switch fbcon_riva32;
-
-struct riva_cursor {
-	int enable;
-	int on;
-	int vbl_cnt;
-	int last_move_delay;
-	int blink_rate;
-	struct {
-		u16 x, y;
-	} pos, size;
-	unsigned short image[MAX_CURS*MAX_CURS];
-	struct timer_list *timer;
-};
-
 /* ------------------------------------------------------------------------- *
  *
  * global variables
@@ -1167,7 +1142,7 @@
 
 	if (!cnt) {
 		memset(&par->state, 0, sizeof(struct fb_vgastate));
-		par->state.flags = VGA_SAVE_MODE  | VGA_SAVE_FONTS;
+		par->state.flags = VGA_SAVE_MODE  | VGA_SAVE_FONT0;
 		/* save the DAC for Riva128 */
 		if (par->riva.Architecture == NV_ARCH_03)
 			par->state.flags |= VGA_SAVE_CMAP;
@@ -1189,11 +1164,10 @@
 	if (!cnt)
 		return -EINVAL;
 	if (cnt == 1) {
-		par->riva.LockUnlock(&par->riva, 0);
-		par->riva.LoadStateExt(&par->riva, &par->initial_state.ext);
+		riva_load_state(par, &par->initial_state);
+		par->riva.LockUnlock(&par->riva, 1);
 
 		fb_restore_vga(&par->state);
-		par->riva.LockUnlock(&par->riva, 1);
 	}
 
 	atomic_dec(&par->ref_count);
@@ -1566,6 +1540,16 @@
 		fb_find_mode(&info->var, info, mode_option,
 			     NULL, 0, NULL, 8);
 #endif
+
+	info->var.yres_virtual = -1;
+	info->var.xres_virtual = info->var.xres;
+	if (rivafb_check_var(&info->var, info))
+		return 1;
+
+	info->fix.line_length = (info->var.xres_virtual * (info->var.bits_per_pixel >> 3));
+	info->fix.visual = (info->var.bits_per_pixel == 8) ? 
+				FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
+	
 	return 0;
 }
 
@@ -1883,10 +1867,8 @@
 	while ((this_opt = strsep(&options, ",")) != NULL) {
 		if (!*this_opt)
 			continue;
-		if (!strncmp(this_opt, "nomove", 6)) {
-			nomove = 1;
 #ifdef CONFIG_MTRR
-		} else if (!strncmp(this_opt, "nomtrr", 6)) {
+		if (!strncmp(this_opt, "nomtrr", 6)) {
 			nomtrr = 1;
 #endif
 		} else
@@ -1935,8 +1917,6 @@
 MODULE_PARM_DESC(font, "Specifies one of the compiled-in fonts (default=none)");
 MODULE_PARM(noaccel, "i");
 MODULE_PARM_DESC(noaccel, "Disables hardware acceleration (0 or 1=disabled) (default=0)");
-MODULE_PARM(nomove, "i");
-MODULE_PARM_DESC(nomove, "Enables YSCROLL_NOMOVE (0 or 1=enabled) (default=0)");
 #ifdef CONFIG_MTRR
 MODULE_PARM(nomtrr, "i");
 MODULE_PARM_DESC(nomtrr, "Disables MTRR support (0 or 1=disabled) (default=0)");
\
ISP Services
Valid XHTML 1.0!\ /
Valid CSS! Last update: 2005-03-22 12:31    [W:0.991 / U:0.190 seconds]
©2003-2005 Jasper Spaans