lkml.org 
[lkml]   [2024]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: 回复: 回复: [PATCH v10 2/3] clocksource: Add JH7110 timer driver
Ziv Xu wrote:
>
>
> > -----邮件原件-----
> > 发件人: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> > 发送时间: 2024年4月30日 18:19
> > 收件人: Ziv Xu <ziv.xu@starfivetech.com>; Daniel Lezcano
> > <daniel.lezcano@linaro.org>; Thomas Gleixner <tglx@linutronix.de>
> > 抄送: linux-riscv@lists.infradead.org; devicetree@vger.kernel.org; Rob Herring
> > <robh+dt@kernel.org>; Krzysztof Kozlowski
> > <krzysztof.kozlowski+dt@linaro.org>; Paul Walmsley
> > <paul.walmsley@sifive.com>; Palmer Dabbelt <palmer@dabbelt.com>; Albert
> > Ou <aou@eecs.berkeley.edu>; Philipp Zabel <p.zabel@pengutronix.de>; Walker
> > Chen <walker.chen@starfivetech.com>; Xingyu Wu
> > <xingyu.wu@starfivetech.com>; linux-kernel@vger.kernel.org; Conor Dooley
> > <conor@kernel.org>
> > 主题: Re: 回复: [PATCH v10 2/3] clocksource: Add JH7110 timer driver
> >
> > Ziv Xu wrote:
> > >
> > >
> > > > -----邮件原件-----
> > > > 发件人: Ziv Xu
> > > > 发送时间: 2024年4月12日 16:46
> > > > 收件人: Daniel Lezcano <daniel.lezcano@linaro.org>; Thomas Gleixner
> > > > <tglx@linutronix.de>; Emil Renner Berthing
> > > > <emil.renner.berthing@canonical.com>; Christophe JAILLET
> > > > <christophe.jaillet@wanadoo.fr>
> > > > 抄送: linux-riscv@lists.infradead.org; devicetree@vger.kernel.org; Rob
> > > > Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> > > > <krzysztof.kozlowski+dt@linaro.org>; Paul Walmsley
> > > > <paul.walmsley@sifive.com>; Palmer Dabbelt <palmer@dabbelt.com>;
> > > > Albert Ou <aou@eecs.berkeley.edu>; Philipp Zabel
> > > > <p.zabel@pengutronix.de>; Walker Chen
> > > > <walker.chen@starfivetech.com>; Xingyu Wu
> > > > <xingyu.wu@starfivetech.com>; linux-kernel@vger.kernel.org; Conor
> > > > Dooley <conor@kernel.org>
> > > > 主题: [PATCH v10 2/3] clocksource: Add JH7110 timer driver
> > > >
> > > > From: Xingyu Wu <xingyu.wu@starfivetech.com>
> > > >
> > > > Add timer driver for the StarFive JH7110 SoC.
> > > >
> > > > This timer has four free-running and independent 32-bit counters.
> > > > Each channel(counter) can trigger an interrupt when timeout even CPU
> > > > is sleeping. So this timer is used as global timer and register
> > > > clockevent for each CPU core after riscv-timer registration on the StarFive
> > JH7110 SoC.
> > > >
> > > > Signed-off-by: Ziv Xu <ziv.xu@starfivetech.com>
> > > > Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> > > > ---
> > > > MAINTAINERS | 7 +
> > > > drivers/clocksource/Kconfig | 11 +
> > > > drivers/clocksource/Makefile | 1 +
> > > > drivers/clocksource/timer-jh7110.c | 345
> > +++++++++++++++++++++++++++++
> > > > include/linux/cpuhotplug.h | 1 +
> > > > 5 files changed, 365 insertions(+)
> > > > create mode 100644 drivers/clocksource/timer-jh7110.c
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS index
> > > > 7c121493f43d..ef9b5f5bad9e 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -21043,6 +21043,13 @@ S: Maintained
> > > > F: Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
> > > > F: sound/soc/starfive/jh7110_tdm.c
> > > >
> > > > +STARFIVE JH7110 TIMER DRIVER
> > > > +M: Samin Guo <samin.guo@starfivetech.com>
> > > > +M: Xingyu Wu <xingyu.wu@starfivetech.com>
> > > > +S: Supported
> > > > +F: Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
> > > > +F: drivers/clocksource/timer-jh7110.c
> > > > +
> > > > STARFIVE JH71X0 CLOCK DRIVERS
> > > > M: Emil Renner Berthing <kernel@esmil.dk>
> > > > M: Hal Feng <hal.feng@starfivetech.com>
> > > > diff --git a/drivers/clocksource/Kconfig
> > > > b/drivers/clocksource/Kconfig index
> > > > 34faa0320ece..2dc97201dee1 100644
> > > > --- a/drivers/clocksource/Kconfig
> > > > +++ b/drivers/clocksource/Kconfig
> > > > @@ -641,6 +641,17 @@ config RISCV_TIMER
> > > > is accessed via both the SBI and the rdcycle instruction. This is
> > > > required for all RISC-V systems.
> > > >
> > > > +config STARFIVE_JH7110_TIMER
> > > > + bool "Timer for the STARFIVE JH7110 SoC"
> > > > + depends on ARCH_STARFIVE || COMPILE_TEST
> > > > + select TIMER_OF
> > > > + select CLKSRC_MMIO
> > > > + default ARCH_STARFIVE
> > > > + help
> > > > + This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
> > > > + the system has started RISCV_TIMER, but you can also use this
> > timer
> > > > + which can provide four channels to do a lot more things on JH7110
> > SoC.
> > > > +
> > > > config CLINT_TIMER
> > > > bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
> > > > depends on GENERIC_SCHED_CLOCK && RISCV diff --git
> > > > a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index
> > > > 4bb856e4df55..8dc2f0ea2d0f 100644
> > > > --- a/drivers/clocksource/Makefile
> > > > +++ b/drivers/clocksource/Makefile
> > > > @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER) +=
> > ingenic-timer.o
> > > > obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> > > > obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> > > > obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
> > > > +obj-$(CONFIG_STARFIVE_JH7110_TIMER) += timer-jh7110.o
> > > > obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
> > > > obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
> > > > obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> > > > diff --git a/drivers/clocksource/timer-jh7110.c
> > > > b/drivers/clocksource/timer-jh7110.c
> > > > new file mode 100644
> > > > index 000000000000..dc770507f209
> > > > --- /dev/null
> > > > +++ b/drivers/clocksource/timer-jh7110.c
> > > > @@ -0,0 +1,345 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * Starfive JH7110 Timer driver
> > > > + *
> > > > + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> > > > + *
> > > > + * This timer has four free-running and independent 32-bit counters
> > > > +and runs in 24MHz
> > > > + * clock on the StarFive JH7110 SoC. Each channel(counter) can
> > > > +trigger an interrupt
> > > > + * when timeout even CPU is sleeping. They support one-shot mode
> > > > +and
> > > > continuous-run mode.
> > > > + *
> > > > + * Each channel is used as a global timer that serves each cpu core:
> > > > + * JH7110 Timer Channel 0 -- CPU 0
> > > > + * JH7110 Timer Channel 1 -- CPU 1
> > > > + * JH7110 Timer Channel 2 -- CPU 2
> > > > + * JH7110 Timer Channel 3 -- CPU 3
> > > > + */
> > > > +
> > > > +#include <linux/clk.h>
> > > > +#include <linux/clockchips.h>
> > > > +#include <linux/cpu.h>
> > > > +#include <linux/iopoll.h>
> > > > +#include <linux/irq.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/reset.h>
> > > > +
> > > > +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> > > > +#define JH7110_TIMER_CH_LEN 0x40
> > > > +#define JH7110_TIMER_CH_BASE(x) ((x) *
> > JH7110_TIMER_CH_LEN)
> > > > +#define JH7110_TIMER_CH_MAX 4
> > > > +
> > > > +#define JH7110_DELAY_US 0
> > > > +#define JH7110_TIMEOUT_US 10000
> > > > +#define JH7110_CLOCKEVENT_RATING 300
> > > > +#define JH7110_TIMER_MAX_TICKS 0xffffffff
> > > > +#define JH7110_TIMER_MIN_TICKS 0xf
> > > > +
> > > > +#define JH7110_TIMER_INT_STATUS 0x00 /* RO[0:4]: Interrupt
> > Status
> > > > for channel0~4 */
> > > > +#define JH7110_TIMER_CTL 0x04 /* RW[0]: 0-continuous run,
> > 1-single run
> > > > */
> > > > +#define JH7110_TIMER_LOAD 0x08 /* RW: load value to counter
> > */
> > > > +#define JH7110_TIMER_ENABLE 0x10 /* RW[0]: timer enable
> > register */
> > > > +#define JH7110_TIMER_RELOAD 0x14 /* RW: write 1 or 0 both
> > reload
> > > > counter */
> > > > +#define JH7110_TIMER_VALUE 0x18 /* RO: timer value register */
> > > > +#define JH7110_TIMER_INT_CLR 0x20 /* RW: timer interrupt clear
> > > > register */
> > > > +#define JH7110_TIMER_INT_MASK 0x24 /* RW[0]: timer
> > interrupt
> > > > mask register */
> > > > +
> > > > +#define JH7110_TIMER_INT_CLR_ENA BIT(0)
> > > > +#define JH7110_TIMER_INT_CLR_AVA_MASK BIT(1)
> > > > +
> > > > +#define JH7110_PERCPU_GET_CLKEVT
> > > > (&jh7110_timer_info.clkevt[smp_processor_id()])
> > > > +
> > > > +/**
> > > > + * struct jh7110_clkevt - Description of each timer channel
> > > > + * @clk: Clock of each timer channel
> > > > + * @rst: Reset of each timer channel
> > > > + * @base: Virtual address of each timer channel
> > > > + * @irq: Interrupt number of each timer channel
> > > > + * @timer_enabled: Enabled flag for each timer channel
> > > > + * @name: Name of each timer channel
> > > > + */
> > > > +struct jh7110_clkevt {
> > > > + struct clk *clk;
> > > > + struct reset_control *rst;
> > > > + void __iomem *base;
> > > > + int irq;
> > > > + bool timer_enabled;
> > > > + char name[sizeof("jh7110-timer.chX")];
> > > > +};
> > > > +
> > > > +struct jh7110_timer_priv {
> > > > + struct clk *pclk;
> > > > + struct reset_control *prst;
> > > > + struct device *dev;
> > > > + struct jh7110_clkevt clkevt[JH7110_TIMER_CH_MAX];
> > > > +};
> > > > +
> > > > +static struct jh7110_timer_priv jh7110_timer_info;
> > > > +
> > > > +/* 0:continuous-run mode, 1:single-run mode */ enum jh7110_timer_mode
> > {
> > > > + JH7110_TIMER_MODE_CONTIN,
> > > > + JH7110_TIMER_MODE_SINGLE,
> > > > +};
> > > > +
> > > > +/* Interrupt Mask, 0:Unmask, 1:Mask */ enum jh7110_timer_int_mask {
> > > > + JH7110_TIMER_INT_ENA,
> > > > + JH7110_TIMER_INT_DIS,
> > > > +};
> > > > +
> > > > +enum jh7110_timer_enable {
> > > > + JH7110_TIMER_DIS,
> > > > + JH7110_TIMER_ENA,
> > > > +};
> > > > +
> > > > +/*
> > > > + * BIT(0): Read value represent channel int status.
> > > > + * Write 1 to this bit to clear interrupt. Write 0 has no effects.
> > > > + * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
> > > > + */
> > > > +static inline int jh7110_timer_int_clear(struct jh7110_clkevt
> > > > +*clkevt) {
> > > > + u32 value;
> > > > + int ret;
> > > > +
> > > > + /* Waiting interrupt can be cleared */
> > > > + ret = readl_poll_timeout_atomic(clkevt->base +
> > > > +JH7110_TIMER_INT_CLR,
> > > > value,
> > > > + !(value & JH7110_TIMER_INT_CLR_AVA_MASK),
> > > > + JH7110_DELAY_US, JH7110_TIMEOUT_US);
> > > > + if (!ret)
> > > > + writel(JH7110_TIMER_INT_CLR_ENA, clkevt->base +
> > > > +JH7110_TIMER_INT_CLR);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_start(struct jh7110_clkevt *clkevt) {
> > > > + int ret;
> > > > +
> > > > + /* Disable and clear interrupt first */
> > > > + writel(JH7110_TIMER_INT_DIS, clkevt->base +
> > > > JH7110_TIMER_INT_MASK);
> > > > + ret = jh7110_timer_int_clear(clkevt);
> > > > +
> > > > + writel(JH7110_TIMER_INT_ENA, clkevt->base +
> > > > JH7110_TIMER_INT_MASK);
> > > > + writel(JH7110_TIMER_ENA, clkevt->base + JH7110_TIMER_ENABLE);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_shutdown(struct clock_event_device *evt) {
> > > > + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> > > > +
> > > > + writel(JH7110_TIMER_DIS, clkevt->base + JH7110_TIMER_ENABLE);
> > > > + return jh7110_timer_int_clear(clkevt); }
> > > > +
> > > > +/* IRQ handler for the timer */
> > > > +static irqreturn_t jh7110_timer_interrupt(int irq, void *data) {
> > > > + struct clock_event_device *evt = (struct clock_event_device *)data;
> > > > + struct jh7110_clkevt *clkevt = &jh7110_timer_info.clkevt[0];
> > > > + u32 reg = readl(clkevt->base + JH7110_TIMER_INT_STATUS);
> > > > + u8 cpu_id = smp_processor_id();
> > > > +
> > > > + /* Check interrupt status and channel(cpu) ID */
> > > > + if (!(reg & BIT(cpu_id)))
> > > > + return IRQ_NONE;
> > > > +
> > > > + clkevt = &jh7110_timer_info.clkevt[cpu_id];
> > > > + writel(JH7110_TIMER_INT_CLR_ENA, (clkevt->base +
> > > > +JH7110_TIMER_INT_CLR));
> > > > +
> > > > + if (evt->event_handler)
> > > > + evt->event_handler(evt);
> > > > +
> > > > + return IRQ_HANDLED;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_set_periodic(struct clock_event_device *evt) {
> > > > + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> > > > +
> > > > + writel(JH7110_TIMER_MODE_CONTIN, clkevt->base +
> > > > JH7110_TIMER_CTL);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_set_oneshot(struct clock_event_device *evt) {
> > > > + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> > > > +
> > > > + writel(JH7110_TIMER_MODE_SINGLE, clkevt->base +
> > > > JH7110_TIMER_CTL);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_set_next_event(unsigned long next,
> > > > + struct clock_event_device *evt) {
> > > > + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> > > > +
> > > > + writel(JH7110_TIMER_MODE_SINGLE, clkevt->base +
> > > > JH7110_TIMER_CTL);
> > > > + writel(next, clkevt->base + JH7110_TIMER_LOAD);
> > > > +
> > > > + return jh7110_timer_start(clkevt); }
> > > > +
> > > > +static DEFINE_PER_CPU(struct clock_event_device, jh7110_clock_event) =
> > {
> > > > + .features = CLOCK_EVT_FEAT_PERIODIC |
> > > > + CLOCK_EVT_FEAT_ONESHOT,
> > > > + .rating = JH7110_CLOCKEVENT_RATING,
> > > > + .set_state_shutdown = jh7110_timer_shutdown,
> > > > + .set_state_periodic = jh7110_timer_set_periodic,
> > > > + .set_state_oneshot = jh7110_timer_set_oneshot,
> > > > + .set_state_oneshot_stopped = jh7110_timer_shutdown,
> > > > + .set_next_event = jh7110_timer_set_next_event,
> > > > +};
> > > > +
> > > > +static int jh7110_timer_dying_cpu(unsigned int cpu) {
> > > > + struct jh7110_timer_priv *priv = &jh7110_timer_info;
> > > > +
> > > > + if (!priv->clkevt[cpu].timer_enabled)
> > > > + return 0;
> > > > +
> > > > + writel(JH7110_TIMER_DIS, priv->clkevt[cpu].base +
> > > > JH7110_TIMER_ENABLE);
> > > > + jh7110_timer_int_clear(&priv->clkevt[cpu]);
> > > > + reset_control_assert(priv->clkevt[cpu].rst);
> > > > + clk_disable_unprepare(priv->clkevt[cpu].clk);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_starting_cpu(unsigned int cpu) {
> > > > + struct clock_event_device *evt = per_cpu_ptr(&jh7110_clock_event,
> > cpu);
> > > > + struct jh7110_timer_priv *priv = &jh7110_timer_info;
> > > > + int err;
> > > > + u32 rate;
> > > > +
> > > > + if (cpu >= JH7110_TIMER_CH_MAX)
> > > > + return -ENOMEM;
> > > > +
> > > > + err = clk_prepare_enable(priv->clkevt[cpu].clk);
> > > > + if (err)
> > > > + goto err_starting_cpu;
> > > > +
> > > > + err = reset_control_deassert(priv->clkevt[cpu].rst);
> > > > + if (err)
> > > > + goto err_soft_reset;
> > > > +
> > > > + rate = clk_get_rate(priv->clkevt[cpu].clk);
> > > > + evt->cpumask = cpumask_of(cpu);
> > > > + evt->irq = priv->clkevt[cpu].irq;
> > > > +
> > > > + err = irq_force_affinity(evt->irq, cpumask_of(cpu));
> > > > + if (err)
> > > > + goto err_affinity;
> > > > +
> > > > + clockevents_config_and_register(evt, rate,
> > JH7110_TIMER_MIN_TICKS,
> > > > + JH7110_TIMER_MAX_TICKS);
> > > > +
> > > > + /* Use one-shot mode */
> > > > + writel(JH7110_TIMER_MODE_SINGLE, (priv->clkevt[cpu].base +
> > > > +JH7110_TIMER_CTL));
> > > > +
> > > > + priv->clkevt[cpu].timer_enabled = true;
> > > > +
> > > > + err = jh7110_timer_start(&priv->clkevt[cpu]);
> > > > + if (err)
> > > > + goto err_affinity;
> > > > + return 0;
> > > > +
> > > > +err_affinity:
> > > > + reset_control_assert(priv->clkevt[cpu].rst);
> > > > +err_soft_reset:
> > > > + clk_disable_unprepare(priv->clkevt[cpu].clk);
> > > > +err_starting_cpu:
> > > > + free_irq(evt->irq, evt);
> > > > + return err;
> > > > +}
> > > > +
> > > > +static int jh7110_timer_probe(struct platform_device *pdev) {
> > > > + struct jh7110_timer_priv *priv = &jh7110_timer_info;
> > > > + struct clock_event_device *evt;
> > > > + struct jh7110_clkevt *clkevt;
> > > > + char name[sizeof("chX")];
> > > > + int ch;
> > > > + int ret;
> > > > + void __iomem *base;
> > > > +
> > > > + base = devm_platform_ioremap_resource(pdev, 0);
> > > > + if (IS_ERR(base))
> > > > + return dev_err_probe(&pdev->dev, PTR_ERR(base),
> > > > + "failed to map registers\n");
> > > > +
> > > > + priv->prst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> > > > + if (IS_ERR(priv->prst))
> > > > + return dev_err_probe(&pdev->dev, PTR_ERR(priv->prst),
> > > > + "failed to get apb reset\n");
> > > > +
> > > > + priv->pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> > > > + if (IS_ERR(priv->pclk))
> > > > + return dev_err_probe(&pdev->dev, PTR_ERR(priv->pclk),
> > > > + "failed to get & enable apb clock\n");
> > > > +
> > > > + ret = reset_control_deassert(priv->prst);
> > > > + if (ret)
> > > > + return dev_err_probe(&pdev->dev, ret, "failed to deassert apb
> > > > +reset\n");
> > > > +
> > > > + for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
> > > > + evt = per_cpu_ptr(&jh7110_clock_event, ch);
> > > > + clkevt = &priv->clkevt[ch];
> > > > + snprintf(name, sizeof(name), "ch%d", ch);
> > > > +
> > > > + clkevt->base = base + JH7110_TIMER_CH_BASE(ch);
> > > > + /* Ensure timer is disabled */
> > > > + writel(JH7110_TIMER_DIS, clkevt->base +
> > JH7110_TIMER_ENABLE);
> > > > + ret = jh7110_timer_int_clear(clkevt);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + clkevt->rst = devm_reset_control_get_exclusive(&pdev->dev,
> > name);
> > > > + if (IS_ERR(clkevt->rst))
> > > > + return PTR_ERR(clkevt->rst);
> > > > +
> > > > + clkevt->clk = devm_clk_get(&pdev->dev, name);
> > > > + if (IS_ERR(clkevt->clk))
> > > > + return PTR_ERR(clkevt->clk);
> > > > +
> > > > + clkevt->irq = platform_get_irq(pdev, ch);
> > > > + if (clkevt->irq < 0)
> > > > + return clkevt->irq;
> > > > +
> > > > + snprintf(clkevt->name, sizeof(clkevt->name),
> > "jh7110-timer.ch%d",
> > > > ch);
> > > > + ret = devm_request_irq(&pdev->dev, clkevt->irq,
> > > > jh7110_timer_interrupt,
> > > > + IRQF_TIMER | IRQF_IRQPOLL,
> > > > + clkevt->name, evt);
> > > > +
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + clkevt->timer_enabled = false;
> > > > + }
> > > > +
> > > > + return cpuhp_setup_state(CPUHP_AP_JH7110_TIMER_STARTING,
> > > > + "clockevents/jh7110/timer:starting",
> > > > + jh7110_timer_starting_cpu,
> > jh7110_timer_dying_cpu); }
> > > > +
> > > > +static const struct of_device_id jh7110_timer_match[] = {
> > > > + { .compatible = "starfive,jh7110-timer", },
> > > > + { /* sentinel */ }
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
> > > > +
> > > > +static struct platform_driver jh7110_timer_driver = {
> > > > + .probe = jh7110_timer_probe,
> > > > + .driver = {
> > > > + .name = "jh7110-timer",
> > > > + .of_match_table = jh7110_timer_match,
> > > > + },
> > > > +};
> > > > +module_platform_driver(jh7110_timer_driver);
> > > > +
> > > > +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> > > > +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
> > > > +MODULE_LICENSE("GPL");
> > > > diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
> > > > index 35e78ddb2b37..4a8b487c327e 100644
> > > > --- a/include/linux/cpuhotplug.h
> > > > +++ b/include/linux/cpuhotplug.h
> > > > @@ -175,6 +175,7 @@ enum cpuhp_state {
> > > > CPUHP_AP_CSKY_TIMER_STARTING,
> > > > CPUHP_AP_TI_GP_TIMER_STARTING,
> > > > CPUHP_AP_HYPERV_TIMER_STARTING,
> > > > + CPUHP_AP_JH7110_TIMER_STARTING,
> > > > /* Must be the last timer callback */
> > > > CPUHP_AP_DUMMY_TIMER_STARTING,
> > > > CPUHP_AP_ARM_XEN_STARTING,
> > > > --
> > > > 2.17.1
> > >
> > > Hi Daniel / Thomas
> > >
> > > I have submitted new version of patch for jh7110 timer driver. Could you please
> > help to review and give your comments?
> > > Thanks a lot!
> >
> > Hi Ziv
> >
> > I tried this on 6.9-rc6 on my VF2. It boots, but very slowly and "choppy". That is
> > it repeatedly runs for <1s and then hangs for about 4s.
> >
> > Does this patch work for you?
> >
> > /Emil
>
> Hi, Emil
>
> I tried this on 6.9-rc7 and 6.9-rc7, but it doesn't reproduce the phenomenon you said.
> The attachment is the log for 6.9-rc6. Could you please share your config file (starfive_visionfive2_defconfig or .config) with me?

Yeah, I just tried again on 6.9-rc7 (+ Conor's riscv-dt-for-next, Minda's PCIe
patches and the PWM driver) with this config:

https://sprunge.us/kiXXba

I don't know if it makes a difference but my also board boots via EFI.

/Emil

\
 
 \ /
  Last update: 2024-05-27 18:19    [W:0.063 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site